The calculation of Ground Heat Exchanger (GHE) performance is very important for predicting the performance and estimating the initial cost of geothermal heat pump systems. In North America it is estimated that on average GHE are oversized by about 10% ~ 30%. A vertical Ground Heat Exchanger (VGHE) is most common because of its smaller environmental influence and land field requirement. This pa...

This paper describes modeling and on-line optimization of a crude unit heat exchanger network at the Statoil Mongstad re nery. The objective is to minimize the energy input in the gas red heater by optimally distributing the cold crude oil in the heat exchanger network. The steady state mass and energy balance of the 20 heat exchangers in the network yields the process model. This model is tted...

The transport phenomena in scraped heat exchanger crystallizers are critical for the process performance. Fluid flow and turbulence close to the heat exchanger (HE) surface as generated by stirring elements and scraper blades are crucial in this respect as they aim at avoiding an insulating scale layer on the HE surface. For this reason we performed largeeddy simulations of the turbulent flow (...

A vertical geothermal probe consists of two or four polyethylene tubes U-shaped, used for circulating the coolant between the heat pump and the ground. It is installed in a deep borehole and sealed in a special grout, a kind of liquid cement, used to seal the borehole, and avoid the presence of air bags between the probe and the ground. Moreover, the grout provides a heat transfer medium betwee...

Heat exchangers are the most important equipment in refrigeration processes. Design and modeling of heat exchangers operating at low temperatures are different from other regular heat exchangers. This study includes two sections. In the first section, design and modeling considerations needed for evaluating the real thermal behavior of heat exchangers at low temperatures were discussed. The...

The aim of this work is to bring forward a new style heat exchanger about hollow fiber membrane module, and to analyze the performance which can expectantly be applied in the lithium bromide absorption refrigeration system. Polyvinylidene fluoride hollow fiber membrane module was adopted as the new style solution heat exchanger, hot feed solution from the generator flowed into the lumen side of...

With distributed power generation market, the most economical solution today is to generate power through small gas turbine systems, arbitrarily categorized as microturbines (5 – 200 kW) and miniturbines (200 – 500 kW). The thermal efficiency of such microturbines is about 20% or less if no recuperator is used in the system. Using a recuperator (regenerator can also be considered but has a numb...

Heat exchanger performance degrades rapidly during operation due to formation of deposits on heat transfer surfaces which ultimately reduces service life of the equipment. Due to scaling, product deteriorates which causes lack of proper heating. Chemistry of milk scaling is qualitatively understood and the mathematical models for fouling at low temperatures have been produced but the behavior o...