In this research the effect of initial microstructure on hot deformation behavior in terms of Ferrite-to-Austenite ratios is studied. Two types of stainless steels C1 and C2 were homogenizing heat-treated and deformed under hot compression examinations at temperatures 900ºC and 1100ºC at strain rate of 0.1s-1. The results showed that the flow stress levels of specimens are strongly r...

Dual turbocharger turbine is fed by an unequal out-of-phase mass flow charge almost all the time which have significant effects on its performance parameters and flow phenomena which are not well known. Besides fully understanding the flow behavior in the radial turbine suffers from lack of detailed information about the secondary flows. This article studies the secondary flow structure within ...

A framework for development of constitutive models based on semi-micromechanical aspects of plasticity is proposed. The resulting of this model for material employed friction type failure criterion, sub-loading surface, and associated flow rule. This model is capable of predicting effects of the rotation of principal stress/strain axes and consequent plastic flow, induced anisotropy of strength...

Flow shop sequencing problem is included in NP-hard problems and a number of heuristic methods have been developed to solve it. Most of these methods are offered for the crisp processing time. However fuzzy algorithm is appropriate for the problems with fuzzy processing time. This paper presents a method in which an algorithm is used to minimize make span of flow shop with fuzzy processing time...

designing and optimization of the intake manifold is one of the important steps in the development of the internal combustion engines. in this paper, the flow inside the intake manifold of an internal combustion engine is investigated by numerical modeling. the convective flux models are adopted to simulate the unsteady compressible flow behavior. to solve the governing equations, for calculati...

C i c ^ A one-dimensional theory based upon fundamental flow relationships ^ is presented for analyzing the behavior of one or more gas streams flowing MM through a single nozzle. This conpound-coropressible flow theory shows that f^ the behavior of each stream is influenced by the presence of the other ^^ streams. The theory also shows that the behavior of coiTpound--coiTpressible flow is pred...

This paper will discuss the algorithm to be implemented in the simulation of traffic flow system with the presence of the intelligent vehicles inside a microscopic traffic flow. This is possible with the introduction of the Behavior Sector to set various driving behavior of the virtual intelligent vehicles. The Behavior Sector consists of five different units, which are Route and Destination, V...

The present investigation studies the behavior of steady flow of visco-elastic liquid between two porous coaxial circular cylinders, where both the cylinders are rotating with different uniform angular velocities about the common axis. In addition, the inner cylinder has uniform velocity along the axis and the visco-elastic fluid, which is a Walters liquid B′, is allowed to flow in the annulus....