So far, much attention has been not received by the influence of the control modes on the wind turbine efficiency in maximum wind energy extraction, which is investigated based on variable speed wind turbines with doubly fed induction generator (DFIG) under vector control in stator flux orientation (SFO) in the paper. Prior art has tended to have an importance on investigating the principle and...

This paper presents system stability analysis of DFIG based wind energy conversion system. Presently for variable wind speed DFIG is considered as efficient machine to generate the power. In addition to this advanced AC/DC/AC converters with closed loop control system has been presented. For stability analysis 1.5MW wind turbine has been considered. As the speed of the wind varies by ± 18% to 2...

Meenakumari.S Department of Electrical and Electronics Engineering,Er.Perumal Manimekalai College of Engineering, Hosur, India Abstract— In this project, a near-unity-power-factor front-end rectifier employing two current control methods, namely, average current control and hysteresis current control, is considered. This rectifier is interfaced with a fixed-pitch wind turbine driving a permanen...

An important aspect related to wind energy integration into the electrical power system is the fluctuation of the generated power due to the stochastic variations of the wind speed across the area where wind turbines are installed. Simulation models are useful tools to evaluate the impact of the wind power on the power system stability and on the power quality. Aggregate models reduce the simul...

There are many advantages of floating wind turbines in deep waters, however, there are also significant technological challenges associated with it too. The dynamic excitation of wind and waves will induce excessive motions along each of the 6 degrees of freedom (6-DOF) of the floating platforms. These motions will then be transferred to the turbine, and directly impact the turbines’ performanc...

Electrical power production is the main target required from wind turbines. This paper describes an approach for wind turbine controller as a vital part of the turbine, where this controller is based on Artificial Neural Network technique and a control scheme has been applied and validated by detailed simulation in MATLAB 6.5/Simulink. The proposed controller enhances the reactive power affecte...

Variable speed operation is essential for large wind turbines in order to optimize the energy capture under variable wind speed conditions. Variable speed wind turbines require a power electronic interface converter to permit connection with the grid. The power electronics can be either partially-rated or fully-rated [1]. A popular interface method for large wind turbines that is based on a par...

Proper knowledge of the wind characteristics of a site is of fundamental importance in estimating wind energy output from a selected wind turbine. The present paper focuses on assessing the suitability and accuracy of the fitted distribution function to the measured wind speed data for Baburband site in Sindh Pakistan. Comparison is made between the wind power densities obtained using the fitte...

A doubly fed induction generator (DFIG) designed to be driven at variable speed from a wind turbine and supplying an isolated load is presented. Two back-to-back PWM voltage-fed inverters connected between the stator and the rotor allow suband super-synchronous operation with low distortion currents. The load voltage is maintained at constant frequency and its magnitude is regulated through con...

The effects of using a wind acceleration device (wind lens) with vertical-axis wind turbines in wind tunnel experiments were examined. A wind lens consists of a diffuser and flanges, and this study investigated the optimum parameters of their configuration with regard to the power augmentation of the turbines. The wind lens with a flat-panel-type diffuser demonstrated power augmentation by a fa...