A novel calcium silicate filler can be made from fly ash. This new filler, known as fly ash based calcium silicate (FACS), has a highly porous surface structure, high brightness (91% ISO), low bulk density (0.31 g/cm 3 ), and high specific surface area (121 m 2 /g). In this paper, its potential application as a paper filler was studied and its effect on drainage, retention, and paper properties...

The aim of this study was to investigate the effect of reactive mono- and tricalcium phosphate addition on the mechanical, surface free energy, degradation and cell compatibility properties of poly(lactide-co-propylene glycol-co-lactide) dimethacrylate (PPGLDMA) thin films. Dry composites containing up to 70 wt.% filler were in a flexible rubber state at body temperature. Filler addition increa...

We are presenting a new method of processing polystyrene-silica nanocomposites, which results in a very well-defined dispersion of small primary aggregates (assembly of 15 nanoparticles of 10 nm diameter) in the matrix. The process is based on the use of a high boiling point solvent, in which the nanoparticles are well dispersed, and a controlled evaporation procedure. The filler's fine network...

This paper introduces a never before described strategy used by bilinguals to fill hesitation pauses. This strategy proved so unique that it was given the name ‘idiosyncratic filler.’ It describes a filler type that is produced unusually often by one individual when hesitating. It is usually a particular lexical filler that is used as often as or more often than all other lexical fillers combin...

OBJECTIVE To explore experimental RBCs derived from a successful commercially available RBC (Grandio) to investigate resin monomer blend and filler parameters (volume fraction, density and diameter) on RBC performance. METHOD Six experimental RBCs modified from a commercial RBC were tested. The three-point flexure strength (σ(3)) and modulus (E) data was determined for groups of 20 bar-shaped...

The thermal conductivity of epoxy resin composites filled with combustion-synthesized hexagonal boron nitride (h-BN) particles was investigated. The mixing of the composite constituents was carried out by either a dry method (involving no use of solvent) for low filler loadings or a solvent method (using acetone as solvent) for higher filler loadings. It was found that surface treatment of the ...

Loss of volume in midface can result in an aged, wasted appearance. Osseous and fat atrophy with aging may further contribute to the loss of soft tissue support and midface ptosis. In the aging of periorbital area and midface, fat atrophy occurs mostly in the suborbicularis oculi fat (SOOF) area. The authors proposed that injection of hyaluronic acid (HA) filler to support the SOOF area could c...

BACKGROUND Stomal leaks can be associated with significant social, psychological and physical morbidity for ostomy patients. Poor fitting of the stoma appliance due to irregularities of skin contours is one cause of stoma leaks which commonly result in secondary irritant dermatitis prompting presentation to a dermatologist. In addition to skin-directed topical therapy and review of stoma applia...

Layered double hydroxide (LDH) organo-modified by a surface-active monomer, 3-sulfopropyl methacrylate (SPMA) was used as filler for polystyrene (PS). Different nanocomposites SPMA/LDH:PS were prepared by bulk polymerization process using low amount of initiator. The two components, filler and polymer, as well as the degree dispersion of the reactive filler as a function of its loading in PS we...

For samples of polymethylmethacrylate with and without quartz filler, the inverse of the contrast-gloss ratio is shown to be related to surface roughness and to the optical scattering coefficient. This finding adds to the importance of optical scattering, which has been widely studied because of its relation to color and translucency of materials. Furthermore, optical scattering by composite fi...