In present work 2D FE (finite element) analysis of deformation and damage evolution site in fiber reinforced composites are carried out. The fiber cracking point and stresses is simulated in the fibers/matrix interface, using the ANSYS FE software at varying volume fractions. The effect of matrix cracks and the interface strength on the fiber failure is investigated. Multi-fibre model were used...

OBJECTIVE Color match between fiber-reinforced composite (FRC) restorations and teeth is an imperative factor in esthetic dentistry. The purpose of this study is to evaluate the influence of veneering composites and fibers on the color change of FRC restorations. MATERIALS AND METHODS Glass and polyethylene fibers were used to reinforce a direct microhybrid composite (Z250, 3M ESPE) and a mic...

Encapsulation of photovoltaic cells was carried out using a transparent glass fiber reinforced composite with enhanced chemical recyclability based on matrix an epoxy resin containing cleavable functional groups. The current-voltage curves showed decrease 6.3% the short-circuit current (Isc) after encapsulation cell, lower than one observed for reference non-recyclable standard composite. Its p...

Strengthening of existing circular reinforced concrete columns by CFRP confinement

Carbon fiber reinforced polymer (CFRP) sheets can be externally bonded for retrofit of concrete structures, improving flexure and sheer strength in the concrete. The key to CFRP sheets is the bond to the concrete, as bond is the means to transfer stress between the tow sheet and the concrete. Experimentation has been conducted to test a current market fiber-resin system, and to develop a resin ...

A tensile test was carried out for continuous SiC fiber reinforced aluminum matrix composites (SiC/Al), which have different specimen width and length. A Monte Carlo simulation using finite element method was also performed with changing the width and length of composite model. The size effect of strength reliability was examined and discussed. The results showed that composite strength does no...

Modeling the random fiber distribution of a fiber-reinforced composite is of great importance for studying the progressive failure behavior of the material on the micro scale. In this paper, we develop a new algorithm for generating random representative volume elements (RVEs) with statistical equivalent fiber distribution against the actual material microstructure. The realistic statistical da...

The method described in the present work was assessed through the production of composite materials made of polypropylene reinforced with chemical thermomechanical pulp of hemp core fibers. Composite materials were obtained by extrusion and injection molding, and by the addition of a coupling agent to ensure a good interphase between fiber and matrix. In all cases, the composite materials were ...

PURPOSE Among the surface treatment methods suggested to enhance the adhesion of resin cement to fiber-reinforced composite posts, conflicting results have been obtained with silanization. In this study, the effects of silanization, heat activation after silanization, on the bond strength between fiber-reinforced composite post and resin cement were determined. MATERIALS AND METHODS Six group...

The measurement of the internal deformations occurring in real-life composite components is a very challenging task, especially for those components that are rather difficult to access. Optical fiber sensors can overcome such a problem, since they can be embedded in the composite materials and serve as in situ sensors. In this article, embedded optical fiber Bragg grating (FBG) sensors are used...