Polyethylene wear in the acetabular components of hip prostheses is implicated in loosening and failure. Radiographic measurement of wear is used to identify patients at risk and to assess prosthesis designs. This paper focuses on analysis of prostheses with cemented acetabular cups from anteroposterior (AP) radiographs. The articular surface of the femoral head and the acetabular rim marker ar...

Theoretical and experimental investigation of wear during coupling in internal gears coated with various polymeric coating materials was performed in this study. In the theoretical part of the study, Archards’ wear formulation was adapted to internal gears and wear behavior in various conditions was determined. Moreover, a fatigue and wear testing apparatus having similar working principle with...

in this study, gtaw process and cored wires were used to coat al/al3ti wear resistant composite on a commercial pure al substrate. wire drawing process was utilized to produce the cored wires from aluminum strips and a mixture of titanium and aluminum powders. the microstructures and the present phases were investigated by metallographic, sem equipped with eds and xrd analysis. moreover, the ha...

Abstract The tolerancing of products for manufacturing is usually performed at the end design process and responsibility designer. Although components are commonly tolerated to ensure functionality, time-based influences, like wear, that occur during operation, often neglected. This could result in small amounts scrap after production, but high quantities failure operation. To overcome this iss...

Alumina-zirconia nano-composites were recently developed as alternative bearing materials for orthopedics. Previous, preliminary reports show that such alumina-zirconia nanocomposites exhibit high crack resistance and low wear rate. In this paper, additional information is given in terms of wear, crack resistance and ageing behaviour: femoral heads are inspected after 7 million cycles of wear t...

In automation flexible manufacturing systems, tool wear detection during the cutting process is one of the most important considerations. This study presents an intelligent system for online tool condition monitoring in drilling process .In this paper, analytical and empirical models have been used to predict the thrust and cutting forces on the lip and chisel edges of a new drill. Also an empi...

Background: Telescopic rods in the management of osteogenesis imperfecta fail frequently. This could be attributed to technical errors, rod design, and structure. We aimed analyze mechanical properties tribology explanted male female components identify effects vivo telescoping that may relate observed patterns successful or failure. Methods: Recruitment took place at 3 4 English centers for...

most of the materials used in the industry of aero-engine components generally consist of titaniumalloys. advanced materials, because of their excellent combination of high specific strength, lightweight and general corrosion resistance. in fact, chemical wear resistance of aero-engine alloyprovides a serious challenge for cutting tool material during the machining process. the reductionin cutt...

Despite the large loads placed upon constrained acetabular liners, little is known of their mechanical performance. We analyzed retrieved liners to determine wear and other damage modes and assess associations between types and severity of damage and clinical, radiographic, and implant variables. Outer rim impingement frequency and severity were higher than that for the inner rim. The 20 degree...

We report the case of a polyethylene tibial post fracture in a 72-year-old woman 14 months after a Scorpio posterior-stabilized (PS) total knee arthroplasty. The polyethylene wear was found around the fracture site of the post, especially over the anterior aspect of the post base. The failure mechanism of the post fracture in the present case was anterior impingement with excessive wear over th...