After the gamma-irradiation sterilization, the most widely used orthopaedic grade polymer bearing liner material for the total joint replacement, ultra-high molecular weight polyethylene (UHMWPE), degrades through the progressive in vivo oxidation. The oxidative degradation makes UHMWPE brittle and leads to reduction of its mechanical properties. In this study, the effect of the in vivo post-ir...

Experimental simulator studies are frequently performed to evaluate wear behavior in total knee replacement. It is vital that the simulation conditions match the physiological situation as closely as possible. To date, few experimental wear studies have examined the effects of joint laxity on wear and joint kinematics and the absence of the anterior cruciate ligament has not been sufficiently t...

The journal bearings subjected to heavy load and slow speed operates in mixed lubrication regime causing contact between the interacting surfaces and resulting in wear. The complexity of wear behavior and lack of unifying theory/model make wear control very challenging. In the present research work, a methodology is outlined for the minimization of the wear of journal bearing operating in mixed...

The understanding of corrosion behavior in NiTi is critical for the devices using this shape-memory alloy. In order to improve the surface properties of NiTi such as corrosion resistance, plasma source ion implantation (PSII) technique was employed with oxygen as incident ions at three levels of implantation dose (5x10(16), 1x10(17) and 3x10(17) ions/cm(-2)). Pitting corrosion and wear-corrosio...

In this research (using induction furnace process) nodular iron with three different percentages of copper (residual, 0.5% and 1,2%) was obtained. Chemical analysis was performed by mass spectrometry and microstructures were characterized by Optical Microscopy (ASTM E3) and Scanning Electron Microscopy (SEM). The study of mechanical behavior was carried out in a mechanical test machine (ASTM E8...

Catalytic partial oxidation (CPOX) has recently received particular attention because it is one of the most attractive technologies for the production of syngas and hydrogen in small to medium scales. Current study subjected to partial oxidation reforming which have simultaneously studied the effect of the fuel composition and flow rates of methane-oxygen mixed gas on the SOFCs performances. In...

The use of Fe-Al intermetallic compound coatings has been investigated in order to improve the tribological behaviour of carbon tool steel. The coatings were formed by a pack cementation process and subsequently diffusion annealing at 900˚C in an argon controlled atmosphere. The optimum diffusion time was selected on the basis of optimum thickness and tribological behaviour. The microstructure...

During an in-situ operation of machines, used for the exploitation energy raw materials, a damaging impact environment on components these machines is experienced. The action degrading factors mostly shown in form clear synergistic effect. In particular, this effect can be seen during driving elements scraper conveyors, as one basic hard coal mining process. article, subject–matter, connected w...

In this article, the mechanical and three body abrasive wear behavior of Bidirectional and short Kevlar fiber reinforced epoxy composites at five different fiber loading (10wt%, 20wt%, 30wt%, 40wt% and 50wt%) have been evaluated. The mechanical properties i.e. tensile strength, flexural strength, inter-laminar-shear strength, and impact strength are performed to notice the behavior of mechanica...