Tensile creep of concrete at early ages is one of the important factors that affect the stress of restrained and partly restrained concrete. But only few data are available on tensile creep of concrete. The effect of ground slag on tensile creep was studied using lever-type tensile creep tester. Early age tensile basic creep of concrete loaded at the age of 3 days was researched. Results show t...

The compressive creep and recovery of foam earplugs was studied at various applied stresses leading to different fi nal creep strains. Deformation was determined from digital videos of the earplugs via image processing software. Creep could not be modeled by a single exponential in time; creep approximated a power law in time. Nonlinear viscoelasticity was observed: creep compliance depends on ...

Using Reclaimed Asphalt Pavement (RAP) in asphalt mixes has become a common practice in many countries as experience indicated that the recycling of asphalt pavements is very advantageous from different perspectives. Some of the advantages of utilizing RAP include conservation of asphalt and aggregate resources, conservation of energy, and reduction in life-cycle cost. In this study, the suitab...

All three burning plasma experiments discussed at Snowmass during the summer of 2002, use preloaded structures to resist some component of the operating loads. For the resistive pulsed reactors, it is the preloads which introduce the most noticeable creep responses because these loads are applied for much longer than the operating loads. If the preloads are maintained during shut-down and maint...

High strength hydraulic concrete was introduced based on its thermo-dynamic and strain-stress characteristics. The compound exponential thermo-dynamic creep model was established. The temperature rise models were interpreted. The bisection constitutional model was deduced as the approach to express the strain-stress non-linearity of high strength hydraulic concrete. The key parameters on thermo...

In order to characterize the creep behaviors of 2219 aluminum alloy at different temperatures and stress levels, a RWS-50 Electronic Creep Testing Machine (Zhuhai SUST Electrical Equipment Company, Zhuhai, China) was used for creep experiment at temperatures of 353~458 k and experimental stresses of 130~170 MPa. It was discovered that this alloy displayed classical creep curve characteristics i...

During their operation, modern aircraft engine components are subjected to increasingly demanding operating conditions, especially the high pressure turbine (HPT) blades. Such conditions cause these parts to undergo different types of time-dependent degradation, one of which is creep. A model using the finite element method (FEM) was developed, in order to be able to predict the creep behaviour...

the changes in viscoelastic properties of potatoes (tubuls agria) stored at 4 ˚c for 4 months were modeled and evaluated by using the creep-recovery test. cylindrical specimens with 15 mm in diameter and 35 mm long were used. the samples were allowed to deform gradually under the constant stress (110 kpa) for about 30 min. after removing the load, the sample recovery was registered. deformation...

The Indirect Tension Test (IDT) is frequently used for evaluation of asphalt material viscoelastic creep properties. With the increased use of finer aggregate gradations and polymer modified asphalt binders in asphalt materials, crushing can occur under the narrow loading heads. The new specimen configuration proposed has a trimmed area under the loading heads, creating a “flattened-IDT.” This ...