The transport properties and the swelling behaviour of NAFION and different sulfonated polyetherketones are explained in terms of distinct differences on the microstructures and in the pKa of the acidic functional groups. The less pronounced hydrophobic/hydrophilic separation of sulfonated polyetherketones compared to NAFION corresponds to narrower, less connected hydrophilic channels and to la...

The Direct Methanol Fuel Cell (DMFC) has attracted much attention due to its potential applications as a power source for transportation and portable electronic devices. Based on the advantages of the scaling laws, miniaturization promises higher efficiency and performance of power generating devices and the MicroDMFC is therefore an emergent technology. In this work, a set of experiments with ...

This paper examines polymer film morphology and several important properties of polyethylene-graft-sulfonated polyarylene ether sulfone (PE-g-s-PAES) proton exchange membranes (PEMs) for direct methanol fuel cell applications. Due to the extreme surface energy differences between a semi-crystalline and hydrophobic PE backbone and several amorphous and hydrophilic s-PAES side chains, the PE-g-s-...

Composite membranes composed of highly conductive and selective layer-by-layer (LbL) films and electrospun fiber mats were fabricated and characterized for mechanical strength and electrochemical selectivity. The LbL component consists of a proton-conducting, methanol-blocking poly(diallyl dimethyl ammonium chloride)/sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) (PDAC/sPPO) thin film. The e...

A porous ceramic support is designed as a multi-functional independent catalyst layer for solid oxide fuel cells (SOFCs) running on liquid hydrocarbon fuel. The consists of highly Ce0.9Ca0.1O2?? backbone and active NiMo catalysts, which could be integrated into the conventional Ni metal containing anode internal reforming Compared to layers sintered anode...

Performance of low temperature fuel cells depends critically on the nanostructures of the material components in the electrodes and membranes. Some studies are reported here for 1) mixed metal nanoparticles supported on mesoporous carbon and 2) modification of nanopores of Nafion via in-situ polymerization of furfuryl alcohol. The anodic oxidation of small organic molecules such as alcohols in ...

Ethanol is an alternative fuel for direct alcohol fuel cells, in which the electrode materials are commonly based on Pt or Pd. Owing to the excellent promotion effect of Ni2 P that was found in methanol oxidation, we extended the catalyst system of Pt or Pd modified by Ni2 P in direct ethanol fuel cells. The Ni2 P-promoted catalysts were compared to commercial catalysts as well as to reference ...

Metal-organic frameworks (MOFs) are emerging material class for the past few years due to its tailorability characteristics for various applications. However, the research and development (R&D) of MOFs is still scarce for fuel cell system. This may be due to the several difficulties faced in selecting a good MOFs-based electrolyte, which consequently affects both proton conduction and methanol ...

In this study; metanol-diesel fuel, organometal MnO2 fuels were used to improve the properties of diesel fuel. Besides, the effect of methanol fuel on engine oil was also examined experimentally in a four cylinder, direct injection diesel engine running at 200 bar. Three different diesel fuels were prepared by adding 5, 10 and 15% methanol into diesel fuel. In order to prevent phase separation ...