In this research, variant selection of martensite transformed from ultrafine-grained (UFG) austenite fabricated by accumulative roll bonding (ARB) process and subsequent annealing was investigated with respect tomorphology of parentaustenitic phase. The results show that the original shape of austenite grain is very effective factor in determiningthe preferred variants of martensite transformed...

Examination of a time–temperature–transformation (TTT) diagram for an eutectoid carbon steel (Fig. 1), bearing in mind the fact that the pearlite reaction is essentially a high temperature one occurring between 550C and 720C and that the formation of the martensite is a low-temperature reaction, reveals that there is a wide range of temperature ∼250–550C within which neither of these phases for...

We study the symmetrised rank-one convex hull of monoclinic-I martensite (a twelve-variant material) in the context of geometrically-linear elasticity. We construct sets of T3s, which are (non-trivial) symmetrised rank-one convex hulls of three-tuples of pairwise incompatible strains. In addition, we construct a fivedimensional continuum of T3s and show that its intersection with the boundary o...

The most efficient way to tune microstructures and mechanical properties of metallic alloys lies in designing and using athermal phase transformations. Examples are shape memory alloys and high strength steels, which together stand for 1,500 million tons annual production. In these materials, martensite formation and mechanical twinning are tuned via composition adjustment for realizing complex...

The stabilization of retained austenite was studied via a two-step cooling procedure. Alloys with M , temperatures below 0 OC were used. It was found that the martensitic transformation starting temperature, M,, was lowered to M,' during the second step of cooling. With increasing the amount of previously formed martensite, the difference in the transformation starting temperatures, AM, (= M,M,...

Ti-Nb-based Gum Metals exhibit extraordinary superelasticity with ultralow elastic modulus, superior strength and ductility, and a peculiar dislocation-free deformation behavior, most of which challenge existing theories of crystal strength. Additionally, this kind of alloys actually displays even more anomalous mechanical properties, such as the non-linear superelastic behavior, accompanied by...

Flash processing is a new heat treatment process being developed to produce steel with relatively high strength and ductility. It involves rapidly heating steel sheet or strip to a temperature in the austenite range and quenching; the entire thermal cycle takes place within 15 seconds. The resulting microstructure is fine and difficult to resolve using standard metallographic techniques. In thi...

Plastic deformations, such as those obtained by shot peening on specimen surface, are an efficient way to improve the mechanical behavior of metals. Generally, scanning electron microscopy (SEM) and electron backscattered diffraction (EBSD) are commonly used to observe the complex microstructural evolutions, such as grain refinement and phase transformation, induced by the surface treatment. In...

The structural relationship between the parent and product phases in martensitic transformation from ? phase is described. atomic movements leading to martensite are accomplished by a long-range shear {112} < 111 > that transforms lattice short-wavelength displacement or shuffle {110} 110 induces correct stacking. microstructures arising out of these paths depend on which modes initiates transf...