نتایج جستجو برای: deposition process
تعداد نتایج: 1388580 فیلتر نتایج به سال:
In-situ high-temperature x-ray diffraction (HTXRD) was used to study the phase formation and reaction kinetics of the Ba2YCu3O6+x (Y-213) phase using the ex-situ “BaF2 conversion process”. Three sets of films on single crystal SrTiO3 substrates were prepared using the e-beam coevaporation technique of BaF2, Y and Cu targets. HTXRD studies were conducted on precursor films with thicknesses of 0....
This paper reviews briefly the development of physical vapour deposition based HTS thin film preparation technologies to today’s state-of-the-art methods. It covers the main trends of in-situ process and growth control. The current activities to fabricate tapes for power applications as well as to tailor interfaces in cuprate are described. Some future trends in HTS thin film research, both f...
Purpose – To introduce recent research and development of biopolymer deposition for freeform fabrication of three-dimensional tissue scaffolds that is capable of depositing bioactive ingredients. Design/methodology/approach – A multi-nozzle biopolymer deposition system is developed, which is capable of extruding biopolymer solutions and living cells for freeform construction of 3D tissue scaffo...
The conventional eddy current method for non-destructive inspection of welding joints has limitations that can examine defects to a certain depth below the surface of the sample and is not suitable for determining deep defects. This limitation can be overcome using the SQUID superconducting sensors. The nonstoichiometric composition of YBCO due to its superconducting temperature and desired cri...
Evaporated optical coatings fabricated from hafnium dioxide and silicon dioxide are the standard approach for high-peak-power laser components due to the high laser damage resistance of such coatings and the ability to deposit on largeaperture substrates. The tensile film stresses of such coatings may lead to failure, however, particularly in low-relative-humidity purged or vacuum use environme...
The underpotential deposition(UPD) phenomena is very interesting not only because of its fundamental importance but also due to its noticeable growing impact on the material science. The amazing possibility of control the deposition process down to monolayer results in new kind of materials with different properties than bulk ones embracing they catalytic, electronic or magnetic properties. Exc...
Laser Aided Manufacturing Process (LAMP) can be applied to repair steel die/molds which are currently repaired using traditional welding process in industry. In order to fully understand the advantages of laser deposition repair process over traditional welded-repair process, the mechanical properties such as tensile strength and hardness of H13 tool steel samples produced by these two processe...
The objective of the study was to develop the operational basis for rapid and controlled deposition of crystal coatings from particles of a wide size range. We deposited such structured coatings by dragging with constant velocity a small volume of liquid confined in a meniscus between two plates. Two types of structured coatings were characterized: latex colloidal crystals and thin layers from ...
Most thin-film techniques require a multiple vacuum process, and cannot produce high-coverage continuous thin films with the thickness of a few nanometers on rough surfaces. We present a new "paradigm shift" non-vacuum process to deposit high-quality, ultra-thin, single-crystal layers of coalesced sulfide nanoparticles (NPs) with controllable thickness down to a few nanometers, based on thermal...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید