The aim of this study was to evaluate the shear bond strength of brackets bonded with different restorative systems and compare it with that afforded by an established orthodontic bonding system. Seventy human bicuspids were used, divided into five different groups with 14 teeth each. Whereas a specific orthodontic bonding resin (Transbond™ XT) was used in the control group, the restorative sys...

Objectives: This study was aimed to compare the mean shear bond strength of four orthodontic bonding materials used for bonding orthodontic brackets. Self-cure composite adhesive (Reliance orthodontics), light cure composite adhesive (Transbond XT, 3M Unitek), light cure with self-etching primer (SEP), Transbond XT and Transbond Plus, 3M Unitek and light cure with moisture-insensitive primer (M...

This study aimed to compare in vitro the shear bond strength between metallic brackets (Abzil) with conventional mesh bases and metallic brackets with bases industrially sandblasted with aluminum oxide using three adhesive systems, in order to assess the influence of sandblasting on adhesiveness and to compare 3 different bonding systems. Two hundred and forty bovine incisors were used and rand...

INTRODUCTION Incorporating a feldspar chemical bond between alumina filler particles is expected to increase the wear-resistant and flexural strength properties. AIMS AND OBJECTIVES An investigation was carried out to evaluate the influence of the feldspar chemical bonding between alumina filler particles on wear and flexural strength of experimental alumina/feldspar dental composites. It was...

The widespread use of porcelain in restorative dentistry is generally due to its esthetic appearance even though it is brittle. The transverse strength, or modulus rupture, averages around 108 MPa (16,000 psi) for aluminous porcelain and 88 MPa (13,000 psi) for feldspathic porcelain. The tensile strength, as determined by diametral compression, is approximately 29 MPa (4,200 psi) for opaque fel...

The purpose of this study was to evaluate the shear bonding strength and leakage of heat-polymerized denture base resin to titanium-aluminum-niobium (Ti-6Al-7Nb) and cobalt-chromium (Co-Cr) castings using four adhesive systems; three adhesive primers (Metal Primer II, Metal Link, MR. Bond) and one heat-polymerized adhesive resin containing 4-META (Metadent). The resin tab was heat-polymerized d...

Background: New materials that are introduced in operative dentistry can potentially have orthodontic applications. One of the most important advances in the dental material field is the application of nanotechnology to resin composites. Recently, new fillers with size ranging from approximately 5-100 nm have been developed. These materials could thus be considered as precursors of nanocomposit...

There is an increasing need to determine accurately the strength properties of tendons for an effective ground control on mines and underground structures as well as on modelling simulations. The strength properties of cables, used as cable bolts, have been evaluated mainly by their ultimate tensile strength, as this kind of test can be carried out in the field as well as in the laboratory. Onl...

We produced experimentally a new bonding material that consisted of a mixture of a base resin (4-META/MMA-TBB resin adhesive) and thermoexpandable microcapsules for safe, easy debonding. Microcapsules in the base resin would start expansion at 80 degrees C, leading to a remarkable decrease in bond strength. Stainless steel brackets were bonded to bovine permanent mandibular incisors using bondi...

background: based on contradictory findings concerning the use of lasers for enamel etching, the purpose of this study was to investigate the shear bond strength of teeth prepared for bonding with er-yag laser etching and compare them with phosphoric acid etching. materials and methods: in this in vitro study forty – eight premolars, extracted for orthodontic purposes were randomly divided in t...