X-shooter is a new high-efficiency spectrograph observing the complete spectral range of 300-2500 nm in a single exposure, with a spectral resolving power R>5000. The instrument will be located at the Cassegrain focus of one of the VLT UTs and consists of three spectrographs: UV, VIS and Near-IR. This paper addresses the design, hardware realization and performance of the Near-IR spectrograph o...

Abstract: In this paper, a DRIE process for fabricating MEMS silicon trenches with a depth of more than 250 m is described. The DRIE was produced in oxygen-added sulfur hexafluoride (SF6) plasma, with sample cooling to cryogenic temperature using a Plasmalab System 100 ICP 180 at different RF powers. A series of experiments were performed to determine the etch rate and selectivity of the some m...

Joule-Thomson cooling systems are used in refrigeration processes such as cryogenic gas liquefaction. Although extensive studies have been carried out by researchers, most of them include cryogenic heat exchangers and their associated fields. In the current study, an attempt was made to indicate the effect of using inappropriate operational conditions in a cryogenic Joule-Thomson cooling system...

Electrically conducting super-macroporous polymer/carbon nanotubes (CNTs) composites have been fabricated with the aid of cryogenic treatment. CNTs are selectively deposited onto the inner surface of interconnected polymer walls surrounding large air-filled pores. The present concept provides highly conducting nanocomposites at a very low nanotubes content.

Abstract Cryogenic brines are under-studied, despite the fact that they may contain information about past ice-sheet behavior. form through cryoconcentration of seawater, although specific setting and mechanism formation have been debated. Previous conceptual models brine require seawater isolation from ocean in a closed basin experiencing freezing. We propose instead pore spaces marine sedimen...

The components in top-fuel dragster and stock car engines undergo significantly more force than their production passenger vehicle counterparts do. Therefore, they must be manufactured and processed to withstand those forces so that they do not catastrophically fail while in service. In this project, the effects of austempering and adding a cryogenic processing step to the control quench and do...

The cryogenic system for the Spallation Neutron Source (SNS) is designed by Jefferson Laboratory (JLab) personnel and is based on the existing JLab facility. Our task is to use the JLab control system design [2] as much as practical while remaining consistent with SNS control system standards. Some aspects of the systems are very similar, including equipment to be controlled, the need for PID l...

Short channel MOSFET devices have been fabricated using a commercial 0.25 μm CMOS process and characterized at cryogenic temperatures for further application in hybrid superconductor-CMOS circuits. A 4 K device model has been established through modifying the room temperature CMOS model by taking into account the parameter variation of the discrete MOS devices at cryogenic temperature. We have ...

The ATLAS magnet system, comprising a superconducting central solenoid and three superconducting toroids, has been successfully ramped up for the first time to the nominal operational current of 20.4 kA on 4 th August 2008. Since then, new cryogenic operational challenges have been raised, like the smoothing of steady-state parameters, the enhancing of transient procedures to minimize thermal s...