The classic Kachanov-Rabotnov isotropic creep damage constitutive model has been used in many situations to predict the creep deformation of high temperature components. Typically, the secondary creep behavior is determined by analytical methods; however, the tertiary creep damage constants are found using a mixture of trial and error and numerical optimization. These methods require substantia...

The purpose of this research was to investigate the creep behaviour of the heterogeneous Timber-UHPFRC beams. New developments have been done to further improve the structural performance, such as strengthening of the timber (glulam) beam by bonding composite material combine with an ultra-high performance fibre reinforced concrete (UHPFRC) internally reinforced with or without carbon fibre rei...

In this study, the creep behavior of base metal, weld and heat-affected zone IN738 superalloy welded by pulsed Nd:YAG laser was investigated newly developed small punch testing method in temperature 700 °C under forces 350 N 45N. The results time–displacement showed that aging heat treatment causes a significant increase rupture time compared to casting specimen. This due an volume fraction dec...

Directionally solidified (DS) Ni-base superalloys have become a commonly used material in gas turbine components. Controlled solidification during the material manufacturing process leads to a special alignment of the grain boundaries within the material. This alignment results in different material properties dependent on the orientation of the material. When used in gas turbine applications t...

Edge-notched eccentrically compressed fracture specimens made of aggregate of reduced size are loaded in standard creep test frames. Measurements of the time rate of crack mouth opening in notched concrete specimens subjected to constant load of almost one month duration are reported and analyzed. To reveal the size effect, geometrically similar specimens of four sizes in the ratio I :2:4:8 are...

The previously developed microprestress-solidification theory for concrete creep and shrinkage is generalized for the effect of temperature ~not exceeding 100°C!. The solidification model separates the viscoelasticity of the solid constituent, the cement gel, from the chemical aging of material caused by solidification of cement and characterized by the growth of volume fraction of hydration pr...

Tensile–creep experiments were conducted in the temperature range 100–200 C and stress range 20–83 MPa for a series of magnesium–zinc–yttrium (Mg-Zn-Y) and mangnesium-zinc–zirconium (Mg-ZnZr) alloys ranging from 0 to 5.4 wt% Zn, 0 to 3 wt% Y, and 0 to 0.6 wt.% Zr. The greatest tensile– creep resistance was exhibited by an Mg–4.1Zn–0.2Y alloy. The room-temperature yield strength increased with i...