In this work, the mechanism for fracture of brittle substances such as rocks under a uniform normal tension is considered. The oriented straight micro-cracks are mostly created in all the polycrystalline materials resulting from the stress concentrations. The present work focuses on the interactions of the pre-existing micro-cracks, which can grow and propagate within a rock-like specimen. The ...

Crack growth analysis has remained one of the challenging problems in the fracture mechanics of structures. On the other hand, the fatigue crack growth is a common phenomenon in the components of structures like airplanes, navies and fluid storages where the fracture due to crack should be considered in the design of these structures. In this paper, the finite volume method (FVM) is extended fo...

We first present a nonuniform box search algorithm with length of each side of the square box dependent on the local smoothing length, and show that it can save up to 70% CPU time as compared to the uniform box search algorithm. This is especially relevant for transient problems in which, if we enlarge the sides of boxes, we can apply the search algorithm fewer times during the solution process...

The secondary cone crusher's shields at Sarcheshmeh Copper Complex of Iran are made of Hadfield steel with a nominal composition of Fe-1.3 % C-12 % Mn. They have a cut-off in the shape of a cone with an upper end diameter of 80cm and an approximate lower end diameter of 200 cm whose main problem is an unexpected early failure under normal working condition. In this paper, the results of metallo...

The propagation of fractures during the drying of a colloidal silica suspension confined in a vertical microtube is investigated. During the drying process, the particle concentration increases until gel formation. In the gelled region, the tensile stresses increase and lead to the formation of two vertical perpendicular cracks propagating in the drying direction, dividing the tube into four eq...

Fretting fatigue induced by combined localized cyclic contact motion and external bulk fatigue loadings may result in premature and dramatic failure of the contacting components. Depending on fretting and fatigue loading conditions, crack nucleation and possibly crack propagation can be activated. This paper proposes a procedure for estimating these two damage thresholds. The crack nucleation b...

Mode-I crack propagation in quasi-brittle material such as rock and concrete is studied by a new numerical method, lattice cellular automata. Cellular automaton method is an efficient method that simulates the process of self-organization of the complex system by constructing some simple local rules. It is of the advantage of localization and parallelization. Lattice model can transform a compl...

Ultrasonic in situ monitoring of metal alloys has been successfully demonstrated for determining the presence and size of fatigue damage within a stracture. Ultrasonic techniques, however, only provide an estimate of the state of the stracture at that time and do not predict the remaining fatigue life. On the other hand, a statistical crack propagation approach, which models the expected remain...

Fretting fatigue induced by combined localized cyclic contact motion and external bulk fatigue loadings may result in premature and dramatic failure of the contacting components. Depending on fretting and fatigue loading conditions, crack nucleation and possibly crack propagation can be activated. This paper proposes a procedure for estimating these two damage thresholds. The crack nucleation b...

We review a series of large-scale molecular dynamics studies of dynamic fracture in brittle materials, aiming to clarify questions such as the limiting speed of cracks, crack tip instabilities and crack dynamics at interfaces. This chapter includes a brief introduction of atomistic modeling techniques and a short review of important continuum mechanics concepts of fracture. We find that hyperel...