In this paper, the present investigation has been conducted keeping in mind some of the problems concerning the crack propagation direction and growth under constant loading in an inclined crack geometry. The present studies mainly focused on the development and modifications in the crack growth criterion to account the biaxial, shear loading and number of stress terms. Existing criteria for th...

Fatigue-crack-growth (FCG) rate tests were conducted on compact specimens made of an Inconel-718 alloy to study the behavior over a wide range in load ratios (0.1 6 R 6 0.95) and a constant Kmax test condition. Previous research had indicated that high R (>0.7) and constant Kmax test conditions near threshold conditions were suspected to be crack-closure-free and that any differences were attri...

The role of crack-tip shielding in in ̄uencing mixed-mode (mode I‡ II) fatigue-crack growth thresholds for large, through-thickness cracks in a Ti±6Al±4V turbine blade alloy is examined under high-cycle fatigue loading conditions, i.e., at a loading frequency of 1000 Hz in ambient temperature air for load ratios (Kmin=Kmax) of R ˆ 0:1±0.8. Techniques are developed to quantify crack-tip shielding...

Due to the lack of paralinguistic information, politeness gains a considerable significance in telephone conversations (TCs). The use of politeness strategies can help interlocutors promote and/or maintain social harmony in telephone interactions. Using the Rapport Management Model proposed by Spencer-Oatey (2008), this study intended to primarily investigate the fundamental closing structures ...

In this study, the frozen stress photoelastic method was used to investigate the three-dimensional effect on the crack growth behavior in a centrally perforated circular cylinder under internal pressure. The inner surface of the cylinder had a star shape, which consisted of six fins. The specimens were capped at the ends and pressurized internally above critical temperature after real cracks we...

Modeling of crack propagation by a finite element method under mixed mode conditions is of prime importance in the fracture mechanics. This article describes an application of finite element method to the analysis of mixed mode crack growth in linear elastic fracture mechanics. Crack - growth process is simulated by an incremental crack-extension analysis based on the maximum principal stress c...

In this study, the phase field model of crack propagation is used to study the dynamic branching instability in the case of inplane loading in two dimensions. Simulation results are in good agreement with theoretical predictions and experimental findings. Namely, the critical speed at which the instability starts is about 0.48cs. They also show that a full 3D approach is needed to fully underst...

This paper deals with the effect of several residual stress profiles on the fatigue crack propagation in prestressing steel wires subjected to tension loading or bending moment. To this end, a computer program was developed to evaluate the crack front evolution on the basis of the Walker law. Results demonstrate that the absence of residual stresses makes the crack propagate towards a preferent...

An axi{symmetric problem for a penny{shaped crack bridged by bres is considered. The study is reduced to the analysis of a hy-persingular integral equation with respect to the relative crack{face separation over a circular domain occupied by crack. The special case of a large crack subjected to Mode{I loading is examined. A matched asymptotic expansions technique is used in order to estimate th...

Precisely describing the formation and evolution rules of coal-rock fracturing crack have great value on reservoir fracturing improvement and highly efficient mining of coal bed methane well. In this paper, a non-linear dynamic method is used to study crack damage evolution behavior of coal-rock fracturing. Considering distribution characteristics of natural cracks in coal-rock, and based on da...