We analyze, theoretically and experimentally, the dynamics of the wavepackets in plasmonic beaming devices, and show that the beam evolution in this class of structures is a multiscale phenomenon, which initiates in the near-field proximity of the device, develops continuously over a new length scale many times the wavelength of the light, and is completed well into the far-field of the system....

Gaussian beam-mode expansion with only the fundamental mode does not work properly when the angular region of interest is wide. It is necessary to use higher-order mode for the expansion. A study of the convergence of these higher order modes is presented for the case of a corrugated conical horn. Conclusions about the number of modes necessary for good accuracy are given. © 2005 Wiley Periodic...

Transient thermal field in laser surface hardening treatment of medium carbon steel was analyzed by employing both three-dimensional analytical model and finite element model. In finite element model the laser beam was considered as a moving plane heat flux to establish the temperature rise distribution in the work-piece, while in analytical model laser beam was considered as an internal heat s...

moment-resisting frames have extensive usage in earthquake-prone areas and high ability in energy dissipation.after the earthquake in northridge 1994,kobe 1995 fixed connections of steel structures have shown poor performance and generally they were caught brittle fracture of beam flange weld to the column.in order to remedy to avoid similar situations in future earthquakes,researchers introduc...

We present a technique--based on the Lutz, Winston, and Maleki test used in stereotactic linear accelerator radiosurgery--for verifying whether proton beams are being delivered within the required spatial coincidence with the gantry mechanical isocenter. Our procedure uses a proton beam that is collimated by a circular aperture at its central axis and is then intercepted by a small steel sphere...

Strut-and-tie is a system of forces' distribution in the form of "load-path" connectivity from the applied load point to the support point. Strut-and-Tie Method (STM) has been developed based on simple truss model. STM models represent the load carrying mechanism of a structural member by approximating the flow of internal forces by means of struts representing the flow of compressive stresses ...

The occurrence of P. verrucosum and ochratoxin A (OTA) were surveyed for 3 and 4 years, respectively. A total of 250 samples was collected from an average of 30 farms during the 2011, 2012, 2013 and 2014 winter seasons. Most storage bins surveyed were typically 11 m high round bins made of corrugated, galvanized steel, with flat-bottoms and conical roofs. Samples of clumped grain contained the ...