The microstructure of continuously hot-dip galvanizing Zn-Mg coating was investigated in order to obtain the mechanism of the effects of Mg on the corrosion resistance. In this paper, the vertical section of the Zn-0.20 wt % Al-Mg ternary phase diagram near the Al-low corner was calculated. The results indicates that the phase composition of the Zn-0.20 wt % Al-Mg ternary phase diagram near the...

Contaminant co-precipitation with continuously generated and transformed iron corrosion products has received relatively little attention in comparison to other possible removal mechanisms (adsorption, oxidation, precipitation) in Fe/H2O systems at near neutral pH values. A primary reason for this is that the use of elemental iron (Fe0) in environmental remediation is based on the thermodynamic...

Abstract: This research examines the performance of strengthened non-uniformly corroded reinforced self-consolidating concrete (SCC) members. This paper focuses on three aspects of concrete including corrosion, concrete cover loss, and repair technique. Up to a 50% corrosion level is considered in this study. Corrosion was experimentally induced and was simulated in other cases. Twenty-six rein...

The stability of an electrodeposited nanocrystalline Ni-based alloy coating in a H₂S/CO₂ environment was investigated by electrochemical measurements, weight loss method, and surface characterization. The results showed that both the cathodic and anodic processes of the Ni-based alloy coating were simultaneously suppressed, displaying a dramatic decrease of the corrosion current density. The co...

+*Witte, F; *Fischer, J; **Nellesen, J; **Crostack HA; ***Beckmann, F; *Windhagen, H +*Hannover Medical School, Hannover, Germany [email protected] INTRODUCTION: The in-vivo corrosion of magnesium alloys has the potential to provide a new mechanism which would allow degradable metal implants to be applied in musculoskeletal surgery [1]. This would particularly be true if magnesium alloys with pred...

In this research, graphene oxide (GO) nanoparticles were modified by second and fourth generations of poly(amidoamine) dendrimers in order to improve the particle dispersion quality in the epoxy matrix and therefore its barrier anti-corrosion performance. Confirmation on the GO surface modification by Polyamidoamine generation 2 (PAMAM2) and polyamidoamin generation 4 (PAMAM4) was carried o...

y-tial intermetallic alloy have a good potential for use as biomaterial, due to its good corrosion resistance. in this paper, two fundamental electrochemical techniques namely electrochemical impedance spectroscopy and potentiodynamic anodic polarization were used to evaluate the corrosion performance of g-tial in ringer's solution. surface modification treatments were employed with the pu...

The research progress surrounding second-phase particle-induced corrosion has been expounded through extensive work, including local (pitting corrosion, crevice stress corrosion) of Al2O3, (RE)-AlO3, CaS, MnS, NbC, and other particles in microalloyed high-strength rebars. By summarizing the mechanism these rebars, this review further explores fact that play an inducing role which guiding signif...