The ultimate strength of reinforced concrete slabs is frequently governed by the punching shear capacity, which may be increased with addition of traditional fitments such as reinforcing steel, headed studs or shear heads. In addition to these traditional methods of strengthening against punching, steel fibre reinforcement has proved to be an effective and viable alternative. The addition of fi...

A shear capacity model of reinforced concrete members with circular cross section transversely reinforced with circular hoops has been developed. The proposed model is based on the truss analogy by adding a concrete contribution term to the capacity of the shear reinforcement. An additional deviatoric shear resisting th c curv pres nism ste ved und ctor mechanism of hoops present solely in memb...

Strong vertical ground motions can significantly alter axial forces in a bridge column. Axial force variations also affect the concrete contribution to the shear capacity of a reinforced concrete (RC) member. However, the effect of axial force demands on shear capacity is a fairly complex issue since the shear demand in an RC bridge column is affected by variations in the axial force. A combine...

abstract: Although structures have been built from masonry for many years, little is still known about the behaviour of a wall subject to in-plane shear. This particularly true partially grouted concrete masonry. The factors that are affect strength this type discussed with varying results and interpretations highlighted. There consensus increasing axial stress increases shear reduces ductility...

in the construction process of a plastic concrete cut-off wall, concreting is usually performed using the termie pipe method. in this method, concreting is performed from the lowest point in the excavated trench (containing the slurry) using a funnel and the pipe connected to it. the concrete poured in the funnel gradually settles in the panel through the termie pipe which is beneath the slurry...

This study makes use of the Tsallis entropy to predict the shear stress distribution. Given a definition of the Tsallis entropy, it is maximized by using the probability density function, which then is used to attain a novel shear stress equation. This is then employed for calculating the shear stress distribution in rectangular channels in different aspect ratios and finally, for viability, th...

Abstract This paper presents a new type of prefabricated concrete structure system and the corresponding shear wall structure. The finite element analysis base on OpenSees is carried out to analyze its mechanical properties. rationality correctness are obtained by comparing it with test hysteresis curve.

background: the interaction between the blood and the vessel wall is of great clinical interest in studying cardiovascular diseases, the major causes of death in developed countries. objective: to understand the effects of incorporating fluid-structure interaction into the simulation of blood flow through an anatomically realistic model of abdominal aorta and renal arteries reconstructed from c...

in the construction process of a plastic concrete cut-off wall, concreting is usually performed using the termie pipe method. in this method, concreting is performed from the lowest point in the excavated trench (containing the slurry) using a funnel and the pipe connected to it. the concrete poured in the funnel gradually settles in the panel through the termie pipe which is beneath the slurry...