volumetric techniques were employed to study the adsorption of co2 on a purified multi-wall carbon nanotubes (mwnt’s) sample, as a mesoporous material, at isothermal conditions of 288, 293 and 298 k and pressures ranging from 30 to 150 kpa. langmuir, freundlich and sips equations were used to represent the isotherms. also the parameters of these fitted isotherm models have been determined. the ...

In this study, the adsorption of synthetic landfill leachate onto four kinds of activated carbon has been investigated. From the equilibrium and kinetics experiments, it was observed that coal based PAC presented the highest organic pollutants removal efficiency (54%), followed by coal based GAC (50%), wood based GAC (33%) and wood based PAC (14%). The adsorption equilibrium of PAC and GAC was ...

Anion adsorption on the aluminum oxide, gibbsite, was investigated as a function of solution pH (3Y11) and equilibrium solution Mo (3.13, 31.3, or 313 Kmol/L), P (96.9 Kmol/L), or S (156 Kmol/L) concentration. Adsorption of all three anions decreased with increasing pH. Electrophoretic mobility measurements indicated a downward shift in point of zero charge, indicative of an inner-sphere adsorp...

A novel adsorbent (AMPS-silica) was synthesized by bounding AMPS (2-acrylamido-2-methylpropanesulfonic acid) onto silica surface, which functioned with γ-methacryloxypropyltrimethoxysilane reagent. The adsorbent was characterized by nitrogen adsorption/desorption measurement, thermogravimetric analysis (TGA) and potentiometric titration analysis. The TGA result indicated that the surface modifi...

Adsorption of CS2 vapors has been studied on different types of activated carbons obtained from different source raw materials. The activated carbons have different surface areas and are associated with varying amounts of the carbon-oxygen surface groups. The adsorption of CS2 vapors is not directly related to surface area, but is considerably influenced by the presence of carbonoxygen surface ...

The adsorption of bixin in aprotic solvents onto acid- and alkali-treated kaolinite was investigated. Kaolinite was treated three times, for 6 h each, with 8 M HCl or 5 M KOH. The adsorbents were characterized by XRD, FT-IR, EDS, and BET-N2. The effects of contact time and dye concentration on adsorption capacity and kinetics, electronic transition of bixin before and after adsorption, and also...

methyl orange is one dye resulted from the textile industry. the aim of this study is to test theadsorption capacity of nickel oxide nanoparticles for removing the methyl orange from aqueoussolution. the parameters studied were the effect of temperature, contact time and initial ph ofsolution. results indicate that the removal efficiency of nickel oxide nanoparticles increases withincreasing co...

This study investigated arsenate and arsenite adsorption on an iron(III) oxide/silica adsorbent that had a Fe/Si molar ratio of 3. Batch experiments were conducted with regard to adsorption kinetics, isotherms, pH effects and interference of phosphate and sulfate on arsenic adsorption. The adsorption of arsenite was faster than that of arsenate. The adsorption kinetics could be well described b...

batch experiments were conducted to study the adsorption behaviors of lead ion (pb2+) onto ferrihydrites prepared using three different procedures which were characterized  by textural analysis (bet). the adsorption removal of pb2+ by the three ferrihydrites (called fh-1, fh-2 and fh-3, respectively) were compared, and fh-3 shows fast adsorption kinetics as well as high adsorption capacities, t...

In recent years, the underground water sources in southern Taiwan have become salinized because of saltwater intrusions. This study explores the adsorption characteristics of activated carbon on salinizing inorganic salts using isothermal adsorption experiments and provides a model analysis. The temperature range for the isothermal adsorption experiments ranged between 5 to 45 °C, and the amoun...