calcium carbonate nano-particles were synthesized by a reverse micro-emulsion method at room temperature with tween® 80 and span® 80 as co-surfactants. the nano-particles synthesized were surface modified by stearic acid. an important operating variable in the span 80-tween 80/toluene/water reverse micro-emulsion system, the ω-value (water/surfactant molar ratio) was investigated. the material ...

A novel microchip separation method for microparticles based on electromagnetophoresis was developed. In this method, a double Y-shape microchip with two inlets and two outlets was used for particle separation. Microparticles of two different sizes were suspended in an aqueous solution and introduced into the microchannel from one inlet with a stream of the aqueous solution without particles fr...

Abstract. Differential thermal analysis (DTA) was used to examine the effect of particle size and morphology cobalt (III/IV) oxide (Co3O4) on its response under exposure methane (1 vol % in dry synthetic air), which is a relevant gas for detection combustible gases. The DTA results from catalytic oxidation methane, characteristics should correlate with pellistor response. Co3O4 samples differin...

Nanostructured Cu-20Fe alloy was synthesized by mechanical alloying process and the effects of process control agents (PCA) on the phase formation, crystallite refinement and morphology of powder particles were studied. The dissolution of Fe into Cu matrix and the morphology of powder particles were analyzed by X-ray diffraction (XRD) technique and scanning electron microscopy (SEM), respective...

Production of Fe-C alloy powders by mechanical alloying was studied. Fe and graphite elemental powder mixtures containing 0.8 and 1.5wt.% graphite were mechanically alloyed using a planetary ball mill. The structural changes of powder particles during mechanical alloying were studied by x-ray diffractometery, scanning electron microscopy and microhardness measurements. For both compositions, me...

the presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. the aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coefficie...

Nowdays,  iron  nanoparticles  due  to  their  unique  characteristics  are used  in  all  of  sciences  and  technology.  These  nano  particles  due  to their  electrical, magnetic,  optical  and  catalytic  properties  and  having high  area  and  activity  that  is  promped  by  their  small  size  and most importantly  many  scientists  from  the  entire  world  are  interested  in th...

Flotation recovery in geometallurgical modelling is usually predicted based on relationships developed from batch flotation testing of different ore types. These batch flotation tests are usually performed at a constant set of operating conditions and at a fixed feed grind size P80. Usually the laboratory feed grind P80 is that which is expected to be produced in the full-scale flotation circui...

This paper describes the results of experiments using a pilot-scale, 140,000 Btu/h, solid fuel continuous feed laboratory incinerator. A synthetic fuel representative of the municipal solid waste in the United States was formulated and used in this research. The fuel contained Fe and SiO2, and was doped with trace amounts of Al, Ni, Cr, Hg, and PbO. Experiments were performed with varying fuel–...