نتایج جستجو برای: coating thickness hydrodynamic size
تعداد نتایج: 706979 فیلتر نتایج به سال:
Abstract: activity gas diffusion process has been investigated in this research. Effects of coating temperature and aluminumconcentration in powder mixture on formation mechanism were studied using optical and scanning electronmicroscopes, EDS and X-ray diffraction (XRD) techniques. For this purpose two different packs containing 1 and 2wt% aluminum powder, were used for coating the samples at ...
A series of polysulfone and polyacrylate-based zwitterionic coatings were prepared on epoxy-primed aluminum substrata and characterized for their antifouling (AF) and fouling-release (FR) properties towards marine bacteria, microalgae and barnacles. The zwitterionic polymer coatings provided minimal resistance against bacterial biofilm retention and microalgal cell attachment, but facilitated g...
The electrodeposition of Ni-MoO2 composite coatings is a specific process taking place under defined hydrodynamic conditions. In this work the influence of hydrodynamics, current density, and MoO2 concentration on the electrodeposition of Ni-MoO2 coatings from a suspension of MoO2 particles in a Watt’s type bath were investigated by comparison of their polarization characteristics for the hydro...
The synthesis of titania via sol-gel method has been widely studied. In the present work, titania was deposited onto a titanium substrat...
This paper discusses two common problems, “weld tenting” and low coating thickness over the external weld, and their causes in traditional three layer polyolefin pipeline coatings. To tackle these problems, a new approach to applying multilayer polyolefin coating to pipes is introduced. The new system consists of side-extruding high density polyethylene over a graded structure polyethylene (GSP...
In the present work Taguchi method is used to optimize cutting parameters during dry turning of AISI 304 austenitic stainless steel with AlTiCrN coated tool. The coating was deposited on fine-grained K-grade (ISO K-20) cemented carbide cutting insert using physical vapor deposition (PVD) technique. The turning parameters evaluated are cutting speed of 200 and 260 m/min, feed rate of 0.20 and 0....
The concept of functionally graded material (FGM) is currently actively explored in coating design for the purpose of eliminating the mismatch of thermomechanical properties at the interfaces and thus increasing the resistance of coatings to functional failure. In the present paper, three-dimensional elastic deformation of a functionally graded coating/substrate system of finite thickness subje...
The microstructure and properties of a silicon coating on titanium nickelide substrate were studied to assess the possibility using such improve biocompatibility medical implants. with thickness 4.0±0.5 microns was applied TiNi molecular beam epitaxy unit. had submicrocrystalline structure crystallite size 0.1...0.2 microns, developed surface, high crack resistance.
We describe a type of multilayer dielectric coating designed to enhance the intensity of evanescent waves. The coating consists of a stack of alternating high- and low-index quarter-wave layers followed by a final low-index layer whose thickness is chosen to optimize the evanescent-wave intensity. Indirect measurements of the film properties are in good agreement with theory.
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید