The present study aimed to assess the effect of replacing copper as a multi-functional ingredient in the brake pad material with potassium titanate platelet (PTP) and a particular type of ceramic fiber (CF) copper-free composite. Chase dynamometer tests were conducted to compare a brake padchr('39')s tribological behavior when PTP and CF are added to the composition with that of the copper-bear...

The reactive-templated grain growth (RTGG) method is a powerful fabrication technique for producing textured ceramics having enhanced performance compared to those of conventionally prepared non-textured ceramics, for various functional materials. Its wide applicability is demonstrated by the fact that the RTGG method using β-Co(OH)2 templates gave textured ceramics of p-type thermoelectric lay...

OBJECTIVES The aim of the study was to evaluate two ceramic materials as possible substitutes for enamel using two wear simulation methods, and to compare both methods with regard to the wear results for different materials. METHODS Flat specimens (OHSU n=6, Ivoclar n=8) of one compomer and three composite materials (Dyract AP, Tetric Ceram, Z250, experimental composite) were fabricated and s...

Catalysts are important to the chemical industry and environmental remediation due to their effective conversion of one chemical into another. Among them, composite catalysts have attracted continuous attention during the past decades. Nowadays, composite catalysts are being used more and more to meet the practical catalytic performance requirements in the chemical industry of high activity, hi...

OBJECTIVES The aim of this study was to evaluate bond strengths of zirconium-oxide (zirconia) ceramic and a selection of different composite resin cements. STUDY DESIGN 130 Lava TM cylinders were fabricated. The cylinders were sandblasted with 80 µm aluminium oxide or silica coated with CoJet Sand. Silane, and bonding agent and/or Clearfil Ceramic Primer were applied. One hundred thirty compo...

Background and aims. Use of porcelain as inlays, laminates and metal-ceramic and all-ceramic crowns is common in modern dentistry. The high cost of ceramic restorations, time limitations and difficulty of removing these restorations result in delays in replacing fractured restorations; therefore, their repair is indicated. The aim of the present study was to compare the shear bond strengths of ...

objective: different ceramic repair systems have been reported for fractured ceramics. however, limited information is available concerning the bond strength of these systems especially after thermocycling. the aim of this in-vitro study was to determine the effect of thermocycling on the shear bond strength of composite-resin to feldspathic porcelain with and without silane pretreatment. mater...

(2014). Customized glass sealant for ceramic substrates for high temperature electronic application. Abstract This study investigates the ceramic to ceramic bonding, using composite glass frit as the binding layer that is able to tolerate a high temperature environment for ruggedized microelectronic applications. Shear strength measurements were carried out at both ambient room and high tempera...

The prospect of extending natural biological design to develop new synthetic ceramic-metal composite materials is examined. Using ice-templating of ceramic suspensions and subsequent metal infiltration, we demonstrate that the concept of ordered hierarchical design can be applied to create fine-scale laminated ceramic-metal (bulk) composites that are inexpensive, lightweight and display excepti...