In this paper, extensive study of ring-opening polymerization ε-caprolactone (ε-CL) using lipase Novozym 435 as catalyst in flask level and reactor level were conducted. The polymerization rates increase with an increase in time up to 4 h after which there has been a steep decrease for all temperature from 50 to 100 °C in the flask level. The conclusion out of flask level and reactor level stud...

Increasing complexity in reactor designs suggests a need to reexamine of methods applied in spent-fuel characterization. The ability to accurately predict the nuclide composition of depleted reactor fuel is important in a wide variety of applications. These applications include, but are not limited to, the design, licensing, and operation of commercial/research reactors and spent-fuel transport...

Two sequencing batch reactors, one with the conventional anoxic and aerobic (AO) process and the other with the multiple AO process, were operated to examine characteristics of biological nitrogen removal, especially of the multiple AO process. The long-term operation showed that the total nitrogen removal percentage of the multiple AO reactor was 38.7% higher than that of the AO reactor. In th...

In this paper, short circuit analysis, based on the electromagnetic transient program (EMTP), has been used to investigate the behavior of the DC reactor type FCL installed in an electrical distribution grid. System studies show that the DC reactor type FCL can not only limit the fault current to an acceptable value, but also can mitigate the voltage sag. A DC reactor type fault current limiter...

(30 pts) 1. You have been requested to troubleshoot problems with a well stirred reactor in your Texas chemical production plant. After taking the red eye flight and a long taxi ride to your hotel and then the plant your arrive exhausted, but eager to solve this problem. Apparently the problem with this 165 L reactor is that the conversion of the reactant, Anychemical, is too low at XA = 0.53. ...

The urea reactor is one of the most important units in the urea synthesis process. Rigorous simulation of the urea reactor is necessary and significant. Ho,wever, the complicated thermodynamic system and chemical reactions result in difficulties of modeling and simulation. In this work, the urea reactor is considered as a critical gas-liquid concurrent fluid reactor, in which some perforated pl...

A pulsed plasma enhanced chemical vapor deposition (PECVD) reactor is used for the preparation of thin polyacetylene films. A theoretical model based on the mass transport characteristics of the reactor is developed in order to correlate with experimentally obtained spatial deposition profiles for the acetylene plasma polymer film deposited within the cylindrical reactor. Utilizing a free radic...

In this study, temperature variations in a mesophilic anaerobic reactor were used to control the reactor degradation capacity. When the reactor temperature was periodically changed from 32°C to 46°C with a period of 12 h, a near liner increase in methane production in response to temperature augmentation was observed. Furthermore, when the reactor temperature was increased during increased orga...

The Modular Accident Analysis Program for CANDU (MAAP4-CANDU) was developed to assess the consequences of a severe core damage progression in a CANDU nuclear power station. The results from MAAP4-CANDU analyses support Level 2 PSA activities being performed for CANDU stations. During the early stages of a severe core damage accident in a CANDU plant, the primary heat transport system (PHTS) coo...

From discovery in the early 1990s to completion of full-scale anammox reactor, it took almost two decades to uncover the secret veil of anammox bacteria. There were three milestones during the commercialization of anammox: the development of the first enrichment culture medium, the completion of the first commercial anammox reactor, and the fast start-up of full-scale anammox plant. Till now, t...