The Swiss Spallation Neutron Source SINQ of the Paul Scherrer Institute provides neutrons via proton-induced spallation reactions in a lead target. Produced are thermalized and impinge on 235U-targets, enclosed three-part chamber assembly, which is located inner wall shielding. thermal-neutron-induced fission products can be readily transported from this assembly to radiochemical laboratory usi...

a dissolved methane sensor based on silicone tube was designed, constructed and optimized.the silicone tube diameter, silicone tube length and helium flow rate (as the carrier gas(were considered as process parameters to be optimized.a continuous stream of helium (50 ml/min) was directed through the tubing, sweeping out the dissolved methane which diffused through the walls of the tubing from t...

One of the big concerns of big cities is facing with the increase of fossil fuel vehicles in the roads. The cars intensify greenhouse gas emission in civic centers. One approach to reduce the emission is replacing the cars by Plug-In Electric Vehicles (PEVs). In spite of reducing the emission, PEVs have some adverse effect on electric distribution networks. Technical challenges such as load and...

Nanostructures have considerably higher surface areas than their bulk counterparts; thereforesurfaces often play important, sometimes even dominant, roles in the nanostructure properties. Thenanocrystalline and nanotubes have low band gaps and high carrier mobility, thus offeringappealing potential as absorption gas. Interaction between methanol molecules and carbonnanotube is investigated usin...

gas sensitive metal oxide layers used in fabrication of resistive gas sensors are prepared by different deposition techniques. the technical data reported on some basic and practically important specifications of these devices, although fabricated based on the same gas sensitive oxide, are anomalously different. the influence of the fabrication technique used for the deposition of the gas sensi...

obtaining samples that represent original fluid of reservoirs optimizes reservoirs management. the optimized management increases recovery. also, selecting and performing proper improved oil recovery (ior) or enhance oil recovery (eor) programs depend on collecting representative samples. achieving accurate compositions of original in-situ fluid prevents overdesigning surface facilities. repres...

In the present work, a lab-scale packed bed reactor has been used to decarbonize mixtures of inlet gases simulating typical composition blast furnace (BFG) and convert them H 2 -rich streams by means Ca Cu chemical looping concept. The was with 355 g Cu-based oxygen carrier (OC) supported on Al O 3 natural Ca-based sorbent. three main reaction stages; namely (i) Calcium Assisted Steel-mill Off-...

One of the factors which affects the gas lift performance is specific gravity of a lift gas (or the Molecular weight), which can influence the gas solubility in oil and has a direct effect on the gas lift performance. There are some previous researches which have included the lift gas specific gravity in their modeling, but in none of them, a comprehensive research about the effect of lift gas ...