Boron carbide (B4C) added manganese dioxide (MnO2) used as a cathode material for a Zn–MnO2 battery using aqueous lithium hydroxide (LiOH) as the electrolyte is known to have higher discharge capacity but with a lower average discharge voltage than pure MnO2 (additive free). The performance is reversed when using potassium hydroxide (KOH) as the electrolyte. Herein, the MnO2 was mixed with 0, 5...

We contrast the interaction of mercury with adsorbed orthocarborane films and semiconducting (dehydrogenated) boron carbide. Photoemission spectra reveal small shifts in orthocarborane (C2B10H12) molecular orbital binding energies as well as the shift in mercury 5d5/2 shallow core level binding energies, suggesting only small interaction between mercury and the molecular film. Mercury does, how...

In forming tungsten carbide layer by low temperature and vacuum CVD, uniformity of film thickness, adhesion and gloss achieved when the effective zone of coating set is increased to 4450 x 1,100mm is described. Characteristics of tungsten carbide layer are evaluated and compared with other materials. Some practical applications to the mechanical parts of plastic injection molding machines are i...

We observe critical coupling to surface phonon-polaritons in silicon carbide by attenuated total reflection of mid-IR radiation. Reflectance measurements demonstrate critical coupling by a double scan of wavelength and incidence angle. Critical coupling occurs when prism coupling loss is equal to losses in silicon carbide and the substrate, resulting in maximal electric field enhancement.

Abstract The present contribution concentrates on the different effects of Si and Al carbide precipitation austenite decomposition during Q&P-process an additional galvannealing treatment up to 560 °C. These have been investigated by dilatometry (derivation relative length change) differential scanning calorimetry (heat flow) tempering. It was possible show beneficial effect retarding in te...

Abstract: The possibility of vanadium carbide coating formation on AISI L2 steel was studied in molten salt bath containing 33 wt% NaCl- 67 wt% CaCl2. In this research, the effects of time, temperature and bath composition on growing layer thickness were studied. The vanadium carbide coating treatment was performed in the NaCl-CaCl2 bath at 1173, 1273 and 1373 K temperatures for 3, 6, 9 hours a...

Commercial EUV lithographic systems require multilayers with higher reflectance and better stability then that published to date. Interface-engineered MoISi multilayers with 70% reflectance at 13.5 nm wavelength (peak width of 0.545 nm) and 71% at 12.7 nm wavelength (peak width of 0.49 nm) were developed. These results were achieved with 50 bilayers. These new multilayers consist of Mo and Si l...

Introduction Early transition metals carbides are catalytically active in a variety of reactions, such as isomerization reactions, hydrogenation reactions, water-gas shift (WGS), hydrocarbon steam reforming, etc. [1]. Our group recently developed a method to load metal catalysts onto high surface area carbide and nitride supports, and demonstrated that Pt supported on Mo carbide (Mo2C) possesse...

Citation: Han H, Pan D, Liu D, Hu X, Lin M and Li F (2015) Cathodic stripping voltammetric determination of chromium in coastal waters on cubic Nano-titanium carbide loaded gold nanoparticles modified electrode. Front. Mar. Sci. 2:75. doi: 10.3389/fmars.2015.00075 Cathodic stripping voltammetric determination of chromium in coastal waters on cubic Nano-titanium carbide loaded gold nanoparticles...

The mechanical properties of an austenite-based Fe-Mn-Al-C lightweight steel were improved by co-precipitation nanoscale Cu-rich and ?-carbide particles. Fe-28Mn-9Al-0.8C-(0,3)Cu (wt.%) strips near-rapidly solidified annealed in the temperature range from 500 °C to 700 °C. microstructure evolution under different annealing processes studied. Microstructural analysis reveals that ?-carbides part...