This paper presents an analysis of water modeling of steel pouring to study (1) air entrainment and (2) filter effectiveness to remove reoxidation inclusions. In the first part, a review is presented of the physical processes and parameters important in air entrainment in free-surface flows. Then, the use of a water system to model air entrainment in steel pouring is analyzed. Attention is focu...

This paper presents a series of tests on cold-formed stainless steel bolted connections. The test specimens were fabricated from three different types of stainless steel, including austenitic stainless steel EN1.4301 (AISI 304) and EN1.4571 (AISI 316Ti having small amount of titanium) as well as lean duplex stainless steel EN1.4162 (AISI S32101). The material properties of the three types of st...

Steel is the most widely used material in engineering for its cost/performance ratio and coatings are routinely applied on its surface to further improve its properties. Diamond coated steel parts are an option for many demanding industrial applications through prolonging the lifetime of steel parts, enhancement of tool performance as well as the reduction of wear rates. Direct deposition of di...

The theoretical model to compute the long-term stress of simply supported steel-concrete composite beam was deduced. The model includes the effects of steel bars in concrete slab, concrete shrinkage and creep. The computed results agreed well with the test results. On this basis, the effects of factors such as concrete age to loading, longitudinal reinforcement ratio in concrete slab, concrete ...

The strengthening and repair of existing structures using bonded carbon fiber reinforced polymer, CFRP, laminates has attracted a great deal of attention in the past two decades. Investigations clearly indicate the great potential of this method for restoring the capacity of corroded steel beams and improving their fatigue life. One important issue regarding the use of this technique in strengt...

About 40 million tons of steel slag a year, which is the by-product of iron and steel manufacture, is generated in Japan and the almost all the slag is reused for the materials, e.g. cement raw material, road base course material and civil engineering material, by effectively utilizing its characteristics such as chemical components and mechanical properties. Most of its purposes of uses are to...

This paper aims to clarify the effect of steel fiber on the flexural toughness of the high performance concrete containing fly ash and nano-SiO2. The flexural toughness was evaluated by two methods, which are based on ASTM C1018 and DBV-1998, respectively. By means of three-point bending method, the flexural toughness indices, variation coefficients of bearing capacity, deformation energy, and ...

Addition of steel fibers to high strength concrete (HSC) improves its post-peak behavior and energy absorbing capability, which can be described well in term of toughness. This paper attempts to obtain both analytically and experimentally the efficiency of steel fibers in HSC columns with hybrid confinement of transverse reinforcement and steel fibers. Toughness ratio (TR) to quantify the confi...

The core loss of electrical steel is defined as the dissipation of electrical energy in the form of heat during magnetization by an alternating current. Many efforts have been made to reduce the core loss. Numerous parameters, including the chemical composition and the metallurgical technology, influence the properties of the steel. Electrical steel sheets are mainly produced from Fe-Si-C alloy...

Steel bridges that are under severe chloride exposure due to deicing salts or marine environmental effects require frequent maintenance and repair activities to extend their service life and maintain an adequate performance level. In addition to the direct maintenance cost, these maintenance actions may lead to indirect costs associated with traffic delays and environmental effects that can sig...