In this study, buckling analysis of panel types of marine and offshore structural components with initial imperfection under the combined action of lateral pressure and axial compression is carried out. The governing differential equations for thin and moderately thick shells are developed in terms of components of the displacement field. The governing ordinary differential equations are then d...

In this paper we develop vacuum-actuated polyimide bi-stable actuators using buckled diaphragms for applications in the field of MEMS. The fabrication process involves a single mask step and DRIE etch step to fabricate the buckled bi-stable diaphragms. Compressive stresses in a companion thermal oxide layer provide pre-stress in the polyimide mechanical films that initiates diaphragm buckling u...

An arterial dissection is a longitudinal tear in the vessel wall, which can create a false lumen for blood flow and may propagate quickly, leading to death. We employ a computational model for a dissection using the extended finite element method with a cohesive traction-separation law for the tear faces. The arterial wall is described by the anisotropic hyperelastic Holzapfel–Gasser–Ogden mate...

We study the compression of viscous filaments at constant velocity. If slender enough, the filament bends, a viscous analogue of Euler elastic buckling. We measure the characteristic time of this viscous buckling and discuss the link with the elastic critical compression. We show that the analogy only holds in the limit of large capillary numbers. Otherwise capillarity has a stabilizing effect,...

design and construction of efficient and economic reinforced concrete (r.c.) hyperbolic cooling towers have driven the engineers toward the design of tall and thin-shell towers which have considerable high slenderness aspect ratio. consequently, the shell of r.c. cooling towers with relative high slenderness aspect ratio is extremely prone to buckling instability due to wind loading. to increas...

the spline finite strip method (s.f.s.m.) for buckling analysis of plates and plate assemblies subjected to longitudinal compression and bending, transverse compression as well as shear is described. the method allows for the boundary conditions. local buckling coefficients of plates with different boundary conditions under compression, bending and shear are calculated. convergence studies with...

In order to evaluate the reliability of cracked cylindrical shell effectively and reasonably, study load capacity structures understand failure modes structures, in this paper finite element method is adopted for shells with mixed mode crack. The models an inclined through crack under external pressure were established by method, elastic elastic-plastic buckling loads calculated. influences len...

This paper has investigated the effect of hole shape, hole size and hole position on elastic buckling of square perforated plates by using the finite element method. According to the effect law of these three geometric factors on buckling bearing capacity, buckling coefficient was obtained by data fitting. The results show that: The plate with circular perforation has the greatest buckling bear...

This paper presents buckling studies made on skew plates using finite element. The effects of the skew angle, aspect ratio, length-to-thickness-ratio, fibre orientation angle, and numbers of layers in the laminate and laminate sequence on the critical buckling load factor (Kcr) of antisymmetric composite laminates have also been presented. The critical buckling load factor (Kcr) is found to inc...

This paper presents buckling studies made on skew plates using finite element. The effects of the skew angle, aspect ratio, length-to-thickness-ratio, fibre orientation angle, and numbers of layers in the laminate and laminate sequence on the critical buckling load factor (Kcr) of antisymmetric composite laminates have also been presented. The critical buckling load factor (Kcr) is found to inc...