R. J. Benjamin A. R. Balakrishnan Department of Chemical Engineering, Indian Institute of Technology Madras, Madras 600 036, India • An experimental investigation on the nucleation density during nucleate pool boiling of saturated pure liquids at low to moderate heat fluxes is described. The surface-liquid interaction during the boiling phenomena and its effect on the nucleation site density an...

We present results from direct numerical simulations of two types of technologically important phase change processes: directional solidification of a binary alloy and film boiling. We use a two-dimensional finite-difference/front-tracking method which allows us to accurately follow the evolution of the interface between the phases. The method is general in the sense that discontinuities in mat...

Sampling and sample introduction are two key steps in quantitative gas chromatography. In this thesis, a development of a previously described sampling technique as well as a novel concept for sample introduction in gas chromatography are presented. The thesis is based on two papers. Paper I describes a method for preparing physically mixed polymers for use as sorbent phases in open tubular tra...

The thermal resistance to heat transfer into the evaporator section of heat pipes and vapor chambers plays a dominant role in governing their overall performance. It is therefore critical to quantify this resistance for commonly used sintered copper powder wick surfaces, both under evaporation and boiling conditions. The objective of the current study is to measure the dependence of thermal res...

This second part of a two-part study examines the prediction of saturated flow boiling heat transfer in mini/micro-channels. The first part culminated in a technique for determining the dryout incipience quality corresponding to substantial deterioration in the heat transfer coefficient. In this part, a consolidated database for flow boiling in mini/micro-channels is amassed from 31 sources, of...

The ̄ow boiling phenomenon over a heated tube restricted by an interference sleeve, which is a passive enhancement technique, has been analysed using a semi-empirical approach. The liquid boiled was water ̄owing through an annular cross-section. A model developed earlier for the case of pool boiling over porous surfaces has been adapted after modi®cation to pool boiling with interference surfac...

Heat transfer on the microand nano-scales has quickly become an important area of research and development due to its implications for use in MEMS/NEMS devices and electronics cooling [1–4] in the past decade. As these devices become more powerful with reduced volume/surface they will in turn generate more heat in a small area within a short time period, which needs to be removed as efficiently...

Two-phase heat transfer is experimentally examined through vertical small diameter tubes, D =1.45 and 2.8 mm using water under a pressure of 50 to 81 kPa and a natural circulation condition. The pool boiling correlation by Stephan-Abdelsalam and the thermosyphon boiling correlation by Imura, et al. predict the measured experimental data in the 2.8 mm tube with an error of -30%. A large heat tra...

One of the major industry problems is the flow boiling, where reaching to the critical heat flux (CHF) condition can lead to a temperature jump and damage of the systems. In the present study, the effects of a uniform change in tube diameter on subcooled flow boiling and CHF was numerically investigated. The Euler-Euler model was used to investigate the relationship between the two liquid and v...

The nucleation site density (N/A) during pool boiling of binary mixtures has been experimentally examined in terms of the heating surface physical properties, the liquid physical properties, the vapour liquid equilibria and the surface micro-roughness. The liquid mixtures used were acetone carbon tetrachloride and n-hexane carbon tetrachloride. A parameter R,, to characterize the micro-roughnes...