Indoor corrosion failures of aluminum-finned copper-tube evaporator coils, and also in some systems without aluminum fins, is a menacing issue in the heating, ventilation, and air conditioning (HVAC) industry. Extensive laboratory testing has verified the development of a reproducible screening method to assess suspected contaminants of producing premature failures of copper tube resulting from...

A corrosion-inhibiting mixture of compounds has been developed for addition to the water used to rinse metal parts that have been cleaned with aqueous solutions in preparation for adhesive bonding of the metals to rubber and rubberlike materials. Prior to the development of this corrosion inhibitor, the parts (made, variously, of D6AC steel and 7075-T73 aluminum) were rinsed by deionized water,...

Corrosion has been persisting as the most severe concern for steel structures in marine environment. Due to widespread occurrence of biofouling, apart from electrochemical corrosion, microbiologically induced corrosion (MIC) is an important factor that triggers deterioration infrastructures. Traditional anti-corrosion coatings usually lack antifouling function, attachment and colonization micro...

A series of Schiff base and their derivative (oxazepine) have been synthesized. 1, 4-Bis (3-aminopropyl)piperazine was condensed with various aromatic aldehyde in ethanol in the presence of acetic acid as catalyst to yield the Schiff bases. These Schiff’s bases on treatment with phthalic anhydride gave substituted oxazepine. The structure of synthesized Schiff bases has been established on the ...

In the present paper the corrosion properties of structured sheet metals were investigated. The aim of this work is to determinate the influence of the structuring process on the corrosion resistance of sheet metals. For this purpose, these sheets were examined by accelerated tests in corrosion chamber. The investigation was carried out using salt spray test. The experiment was conducted for th...

Significant amount of corrosion damage was revealed during recent complete inspections of airplane structures after years of service. The corrosion damage was located inside airplane’s hull and remained undetected until reaching hull’s outer surface. Therefore a demand for means of timely detection and non-destructive evaluation of corrosion damage arose. This work investigates the possibilitie...

Metallic coatings using thermal spraying techniques are widely applied to structural steels to protect infrastructure against corrosion and improve durability of the associated structures for longer service life. The thermal sprayed metallic coatings consisting of various metals, although have higher corrosion resistance, will still corrode in a long run and may also subject to corrosion induce...

LI, CHONG, Ph.D., June 2009, Chemical Engineering Effect of Corrosion Inhibitor on Water Wetting and Carbon Dioxide Corrosion In Oil-Water Two-Phase Flow (198 pp.) Director of Dissertation: Srdjan Nesic The internal corrosion of flowlines and pipelines made from carbon steel is encountered in the oil and gas industry. The corrosion process is primarily associated with the presence of free water...

magnesium alloys as biodegradable materials can be used in body as an implant materials but since they have poor corrosion resistance, it is required to decrease their corrosion rate by biocompatible coatings. in this study, hydroxyapatite (ha) coatings in the presence of an intermediate layer of zrn as a biocompatible material, deposited on az91 magnesium alloy by ion beam sputtering method at...