High permeability and high permittivity are hard to be achieved simultaneously, either in single-phased materials or in composite materials, such as ferrite-ferroelectric ceramic composites and ferrite-metal percolative composites. In this work, ultra-low percolation threshold is achieved in NiZnCu ferrite-Ag cofired ceramics, which endows the composite with both high permeability and high perm...

The effect of plastic deformation on the transformation of austenite to acicular ferrite in a Fe /Mn /Si /C alloy steel containing non-metallic inclusions was investigated. The transformation to acicular ferrite is retarded and the final fraction of acicular ferrite is reduced in plastically deformed austenite, which is a characteristic of a displacive transformation mechanism. The increase in ...

This book chapter is organized into four major parts. Firstly, it will cover an introduction of using spinel ferrite nanoparticles in biomedical applications, including the antibacterial properties. The second part will provide an overview of the structure and magnetism of spinel ferrites. The third part will focus on the preparation of cobalt ferrite and transition metal substituted cobalt fer...

The microstructural evolution of Fe–0.2C–5Mn steel during intercritical annealing with holding time for up to 144 hours was examined by TEM and STEM. It was demonstrated by TEM that the martensite lath structure gradually transformed into a lamellar ferrite and austenite duplex structure. The partitioning of manganese from ferrite to austenite was found by STEM. Typical Kurdjumov-Sachs orientat...

A small FMR ferrite disk strongly perturbs the cavity field. Graphical representation of the Poynting vector shows that due to the vortex structure the absorption cross-section of a ferrite particle can be much bigger than its geometrical cross-section. Spectral properties of magnetic oscillations in a ferrite disk show unique vortex structures for MS-wave functions.

Pearlitic steel experiences excessive corrosion in a hot and humid atmosphere. The multiphase bainitic/martensitic structure was developed for better combination of strength ductility, especially rolling contact fatigue, but little attention to has been investigated. Corrosion behaviors steels obtained from bainitic-austempering (BAT) bainitic-quenching -partitioning (BQ&P) processes were i...

The atomic level structure of a series of monodisperse single crystalline nanoparticles with a magnetic core of manganese ferrite was studied using X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES) techniques at both the Fe and Mn K-edges, and conventional and high resolution transmission electron microscopy (TEM and HRTEM). In particular, insights on the ...

calcium doped nickel ferrite powders have been prepared by sol-gel combustion technique. metal nitrates, such as calcium nitrate, nickel nitrate and ferric nitrate, were used as the source materials and citric acid and polyvinyl alcohol were used as the burning agent and agglomeration reducing agent, respectively. the average crystallite size of the prepared ferrite was in the order of ~70- 92 ...

Quenched and tempered (Q & T) steels have numerous applications, particularly in the defence industry with welding as main fabrication route. Since imparts stresses due to thermal gradients development during welding, plus fact that Q T fabricated structures are expected function a complex loading environment, it is critically important relax before exposing parts service conditions. The pr...

Structural steels with very high strength levels are often referred to as ultrahigh-strength steels (UHSS). The usage of UHSS has been extensively studied in aerospace industries and offshore platforms. In this study, medium carbon low alloy steel (AMS6305) was thermomechanicaly treated to obtain an ultra-high strength bainitic steel for aircraft engine compressor disk. A novel themomechanical ...