Vu D.L., Ertek B., Dilgin Y., Červenka L. (2015): Voltammetric determination of tannic acid in beverages using pencil graphite electrode. Czech J. Food Sci., 33: 72–76. The pretreated pencil graphite electrode (Pre-PGE) prepared by a chronoamperometry technique was applied for the determination of tannic acid using anodic stripping differential pulse voltammetry. The currents obtained from volt...

We present a new multielement masking method using magnesium hydroxide coprecipitation for the selective determination of Pb by differential pulse anodic stripping voltammetry (DPASV). The recovery of Pb in the masking method was over 95%, while interfering ions (Cd(2+), Co(2+), Cu(2+), Fe(3+), Mn(2+), and Ni(2+)) could be removed at 100% from the analytical sample. A linear regression was obta...

Anodic stripping voltammetry (ASV) with rotating glassy carbon electrode (RGCE) and microfiber carbon electrode (μFCE), both filmed with mercury, were used to determine copper content in wine. Influence of phenolics on in situ mercury film formation was studied. Wine and quercetin were added gradually into solution of Hg(II) in acetic acid-sodium acetate buffer (pH = 4.60). Reduction of Hg(II) ...

This study targets the lesser-known ingredients of smokeless tobacco products, i.e., the toxic metals, in Indian brands. The metals selected in the study included lead (Pb), cadmium (Cd), arsenic (As), copper (Cu), mercury (Hg), and selenium (Se). The differential pulse anodic stripping voltammetry (DPASV) technique was used for estimating the metals Pb, Cd, and Cu; square wave voltammetry for ...

In this work, we report the simultaneous determination of cadmium and lead using glassy carbon electrodes (GCE) modified by poly(3,4-ethylenedioxythiophene) (PEDOT) for linear sweep anodic stripping voltammetry (LSASV). The modification allows metal detection without involving oxygen removal, mechanical stirring and introduction of alloying additions such as Hg, Bi, Sb, etc. during the pre-conc...

Determination of selenium in biological and environmental samples is usually difficult due to its trace or ultra-trace quantities, pre-concentration stages, destruction of organic matrices by acid digestion and oxygen plasma combustion followed by separation from interfering metal ions such as ion exchange separation, solvent extraction or hydride generation. Selective separation of selenium is...

Objectives: The present study is focused on the determination of thallium (I) ions in homeopathic drugs. Methods: The determination was carried out using the Differential Pulse Anodic Stripping Voltammetry (DPASV) technique coupled with the flow-injection measuring system (FIA-DPASV). Results: The thallium content was analyzed in two commercial homeopathic preparations (Thallium aceticum 5CH an...

A novel voltammetry with a modified gold electrode for the direct determination of copper in environmental samples, without any pretreatment, is proposed in this paper. A porous disorganized monolayer was formed on the surface of the gold electrode by the self-assembly of mercaptoacetic acid (MAA), which could selectively permeate small molecules. Subtractive square wave anodic stripping voltam...

In this project, we have attempted to develop a new technique utilizing Boron-doped diamond (BDD) films to electrochemically detect mercury dissolved in solution via the initial deposition of metallic mercury, followed by anodic linear sweep voltammetry in the range from 1010 M to 10 M. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques were employed. The extremely low ...

An electrochemical method based on square wave anodic stripping voltammetry (SWASV) was developed to detect the apoptosis of yeast cells conveniently and quantitatively through the high affinity between Cu(2+) and phosphatidylserine (PS) translocated from the inner to the outer plasma membrane of the apoptotic cells. The combination of negatively charged PS and Cu(2+) could decrease the electro...