A special form of laser spot welding is introduced to overlap dissimilar welding of titanium (G2) to 3105-O aluminum alloy. A welding tactile seam tracking design using following pulses that result to a circular seam leads to spot like shape laser welding. This technique was conducted to joint overlapped grad 2 Titanium alloy (Ti G2) to 3105-O Al alloy, with 1, and 0.5 mm thicknesses respective...

Normal temperature tensile and fatigue tests were adopted to test the mechanical performance and fatigue life of 2524 aluminum alloy under the three states of T3, artificial aging, and creep aging, and scanning electron microscope and transmission electron microscope were also used to observe the fatigue fracture morphology and aging precipitation features of the alloy under the above three sta...

Corrosion and subsequent waterwall wastage has been a significant problem for coal-burning power companies since low NOx burner conditions have been implemented in their furnaces. In order to reduce the amount of waterwall corrosion, coatings for the boiler tubes, such as weld overlay claddings, are currently being pursued. Iron-aluminum based coatings are presently being studied as possible co...

Aluminum lamination was performed to improve the physical and mechanical properties of several wood-based composite panels. The panels were aluminum-laminated on two faces in a hot press at 689 kPa and 120 °C for 6 min. Four types of wood-based composites were used as cores, and aluminum 3003 alloy sheets were used for face laminations. Polyurethane adhesive ensured bonding strength between the...

In this paper we utilize Support Vector Machines to predict the degradation of the mechanical properties, due to surface corrosion, of the Al 2024-T3 aluminum alloy used in the aircraft industry. Precorroded surfaces from Al 2024-T3 tensile specimens for various exposure times to EXCO solution were scanned and analyzed using image processing techniques. The generated pitting morphology and indi...

Effects of Cu content and preaging treatments on precipitation sequence and artificial aging response in aluminum alloy 6022 were investigated using transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and hardness tests. It was found that Cu induces the formation of Q and its precursor metastable phases and has a beneficial effect on the kinetics of artificial aging...

Nanoporous Pt-Co alloy nanowires were synthesized by electrodeposition of Co-rich Pt(1)Co(99) alloy into anodic aluminum oxide (AAO) membranes, followed by a dealloying treatment in a mild acidic medium. These nanowires consist of porous skeletons with tiny pores of 1-5 nm and crystalline ligaments of 2-8 nm. Morphological and compositional evolutions of the porous Pt-Co nanowires upon dealloyi...

Microsilica, or silica fume, is an amorphous type of silica mostly collected as byproduct of the silicon and ferrosilicon alloy production. In this work, low shrinkage alumina-mullite ceramic composites were prepared from mixtures of calcined alumina, silica fume and aluminum metal powder and sintered at 1550 o C for 2 hrs. The influence of silica fume and aluminum powder on the densification p...

Amorphous Co1-xPx alloy nanowire arrays with different sizes and 6.8 wt% x 9.9 wt% were fabricated in an anodic aluminum oxide film by electrodeposition. Transmission electron microscopy, selected area electron diffraction, X-ray fluorescence spectrometer, inductively coupled plasma-atomic emission spectrometer, X-ray diffraction spectrometer and vibrating sample magnetometer are employed to st...

The purpose of this study was to evaluate the effects of acidic primers on adhesive bonding to sintered aluminum oxide (alumina). Alumina disks were primed with one of the following materials: Acryl Bond, All Bond 2 Primer B, Alloy Primer, Estenia Opaque Primer, Eye Sight Opaque Primer, M.L. Primer, MR. Bond, and Super-Bond Liquid. Specimens were then bonded with an acrylic resin initiated with...