Cone calorimeter and controlled atmosphere cone experiments were conducted on various samples. The intent of the tests was to examine behavior uniform composite samples in a range thicknesses, irradiances, oxygen concentrations. Single, layers acrylonitrile butadiene styrene (ABS) compared mix, comprising ABS with surface layer cardboard secondary polyethylene bubble wrap (intended represent po...

This study presents capacitive-type inclinometers composed of flexible polymer pillars and dome-shaped roof frames that were manufactured using the three-dimensional (3D) printing method. Polylactic acid (PLA) filaments acrylonitrile butadiene styrene (ABS) printed by fused deposition modeling type 3D printer to fabricate curing molds, respectively. The operating principle inclinometer was dete...

Atomic force microscopy (AFM) belongs to the high-resolution surface morphology investigation methods. Since it can, in many cases, be applied air, samples can more easily inspected than by a scanning electron microscope (SEM). In addition, several special modes exist which enable examination of mechanical and other physical parameters specimen, such as friction, adhesion between tip sample, el...

Separating different components of a plastic mixture is crucial in its recycling. Among the separation techniques, flotation was selected as cheap, non-toxic, and efficient process. Basis technique refers to selective adsorption depressant on plastics surface which cause alteration energy plastic. Adsorption lignosulfonic acid sodium salt (SL) available waste stream studied. Plastics used this ...

Plastic materials are widely preferred in many applications due to being light and cheap addition manufactured easily with various manufacturing methods like injection molding or additive manufacturing. One of the most used plastic material ABS (acrylonitrile butadiene styrene) is sometimes coated increase its wear corrosion resistance. In this study, investigating effect coating test forces on...

The ohmic curing of two silver micro-particle inks was studied. Silver lines 35 to 75 µm thick were printed on a mixture polycarbonate and acrylonitrile butadiene styrene (PC+ABS) substrate mineral reinforced Nylon 6 thermoplastic, using laboratory-made system based volumetric dosing dispenser. After 48 h stabilization in ambient conditions, current is applied through the with an imposed intens...

Obtaining a highly homogeneous magnetic field is desired for field-controlled applications. For example, the resolution of analysis methods can be improved by generating stronger and more over region interest (ROI). A set 3D-printed passive shims fabricated using additive manufacturing to improve homogeneity Halbach magnet assembly. The feedstock custom acrylonitrile butadiene styrene (ABS)-har...