A superhydrophobic and anti-icing surface was prepared by consecutive immersion in boiling water and sputtering of polytetrafluoroethylene on the surface of an aluminium alloy substrate. The immersion time in boiling water plays an important role on the surface morphology and water repellency of the deposited RF-sputtered Teflon coating. The Teflon-like coating deposited on a rough surface achi...

Fatigue failure characteristics of friction stir welds in 13mm gauge 2024-T351 plate have been assessed. Failure occurred from either the weld region (nugget/flow arm) or from the material immediately surrounding the weld. Fatigue failure from the surrounding material was essentially conventional, initiating from large S-phase intermetallic particles and growing in a macroscopic mode I manner. ...

In the automotive industry, mechanical grinding is employed at finishing line rectification to remove defects left over from upstream, which may also result in microstructure modification within near-surface region of work piece and, consequently, affects its corrosion performance. The present investigates influence on and behaviour Al–Si–Mg (A356) alloy castings order advance understanding pot...

An investigation was carried out in an aluminium recovery works after the simultaneous occurrence of haemolytic anaemia in two workers in the slag disposal plant. The first worker was admitted to hospital suffering from nausea, backache, and haematuria. Jaundice developed on the next day. His urine contained protein, urobilin, haemoglobin, and methaemoglobin but no red cells. During the course ...