The strengthening and repair of existing structures using bonded carbon fiber reinforced polymer, CFRP, laminates has attracted a great deal of attention in the past two decades. Investigations clearly indicate the great potential of this method for restoring the capacity of corroded steel beams and improving their fatigue life. One important issue regarding the use of this technique in strengt...

About 40 million tons of steel slag a year, which is the by-product of iron and steel manufacture, is generated in Japan and the almost all the slag is reused for the materials, e.g. cement raw material, road base course material and civil engineering material, by effectively utilizing its characteristics such as chemical components and mechanical properties. Most of its purposes of uses are to...

This paper aims to clarify the effect of steel fiber on the flexural toughness of the high performance concrete containing fly ash and nano-SiO2. The flexural toughness was evaluated by two methods, which are based on ASTM C1018 and DBV-1998, respectively. By means of three-point bending method, the flexural toughness indices, variation coefficients of bearing capacity, deformation energy, and ...

Addition of steel fibers to high strength concrete (HSC) improves its post-peak behavior and energy absorbing capability, which can be described well in term of toughness. This paper attempts to obtain both analytically and experimentally the efficiency of steel fibers in HSC columns with hybrid confinement of transverse reinforcement and steel fibers. Toughness ratio (TR) to quantify the confi...

The core loss of electrical steel is defined as the dissipation of electrical energy in the form of heat during magnetization by an alternating current. Many efforts have been made to reduce the core loss. Numerous parameters, including the chemical composition and the metallurgical technology, influence the properties of the steel. Electrical steel sheets are mainly produced from Fe-Si-C alloy...

Steel bridges that are under severe chloride exposure due to deicing salts or marine environmental effects require frequent maintenance and repair activities to extend their service life and maintain an adequate performance level. In addition to the direct maintenance cost, these maintenance actions may lead to indirect costs associated with traffic delays and environmental effects that can sig...

Medium-carbon steel is commonly used for the rail, wire ropes, tire cord, cold heading, forging steels, cold finished steel bars, machinable steel and so on. Its fatigue behavior analysis and fatigue life estimation play an important role in the machinery industry. In this paper, the estimation of fatigue life of medium-carbon steel with different surface roughness using established S-N and P-S...

AIM This in vitro study measured the force-deflection behavior of selected initial alignment archwires by conducting three-point bending tests under controlled conditions. The study tested four wire designs: multistranded stainless steel, conventional stainless steel, superelastic nickel-titanium, and thermoactivated nickel-titanium archwires. METHOD The wires (n = 15) were ligated into stain...

Introduction Ingot products account for 8.3% of the total crude steel produced in the world. It is produced either by top pouring or bottom pouring of the liquid in the moulds. The increasing demand for quality steels led to the evolution of bottom pouring technology for casting of steel ingots. This process constitutes of a set up involving pouring sprue and runner system to deliver liquid ste...

Steel is the material of choice for a large number and very diverse industrial applications. Surface qualities along with other properties are the most important quality parameters, particularly for flat-rolled steel products. Traditional manual surface inspection procedures are awfully inadequate to ensure guaranteed quality-free surface. To ensure stringent requirements of customers, automate...