We report the first measurement of the direct stress optic coefficient for yttria-partially stabilized zirconia (YTZP) ceramic, using illumination between 260 and 380 GHz with applied stresses up to 27 MPa. YTZP exhibited a linear change in refractive index as a function of stress across the entire applied stress domain. A direct stress optic coefficient was also measured for polytetrafluoroeth...

The properties of solid oxide fuel cell (SOFC) anode functional layers prepared by impregnation of 1 wt % Pd and 10 wt % ceria into porous scaffolds of either Y0.04Ce0.48Zr0.48O2 (CZY) or composites of La0.3Sr0.7TiO3 (LST) and yttria-stabilized zirconia (YSZ) were examined to determine whether these scaffold materials would have sufficient electronic and ionic conductivity. Laminated tapes were...

Yttria-stabilized zirconia (YSZ) is one of the primary choices for the electrolyte material in solid oxide fuel cells (SOFC), due to its excellent ionic conductivity at high temperatures. Nevertheless, such performance is usually limited by the ionic conductivity at grain boundaries, which is at least two orders of magnitude lower than that of bulk [1]. As a result, many studies have been perfo...

OBJECTIVES To evaluate the bonding of resin-cement to yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) via silica coating followed by silanization, and three one-bottle universal adhesives, with or without prior conditioning using a zirconia primer. METHODS Y-TZP specimens (n=160) were conditioned by tribochemical silica coating and silanization (CS), or alumina sandblasting with one...

Yttria-stabilized zirconia (YSZ, ZrO2:Y2O3) thin films were deposited by reactive DC magnetron sputtering with a high deposition rate from a metallic target of Zr/Y in an argon/oxygen atmosphere. Plasma parameters and composition analysis of the gas phase reveal that the sputtering process in the “compound” mode is reached for a 2.5 sccm oxygen flow rate. Deposition onto silicon in “metal” mode...

Porous composite anodes consisting of a yttria-stabilized zirconia (YSZ) backbone that was impregnated with CeO2 and various amounts of metallic components including Cu, Co and Pd were fabricated. The performance of these anodes was then tested in a solid oxide water electrolysis cell under conditions where the anode was exposed to the reducing gasses H2, CH4 and CO. The reducing gasses were us...

The influence of electrode configuration on the impedancemetric response of nitric oxide (NO) gas sensors was investigated for solid electrochemical cells [Au/yttria-stabilized zirconia (YSZ)/Au)]. Fabrication of the sensors was carried out at 1050 °C in order to establish a porous YSZ electrolyte that enabled gas diffusion. Two electrode configurations were studied where Au wire electrodes wer...

Yttria-stabilized zirconia (YSZ) is one of the primary choices for the electrolyte material in solid oxide fuel cells (SOFC), due to its excellent ionic conductivity at high temperatures. Nevertheless, such performance is usually limited by the ionic conductivity at grain boundaries, which is at least two orders of magnitude lower than that of bulk [1]. As a result, many studies have been perfo...

The sensing characteristics of a yttria-stabilized zirconia (YSZ)-based sensor utilizing a NiO sensing-electrode (SE) towards toluene (C(7)H(8)) and interfering gases (C(3)H(6), H(2), CO, NO(2) and C(2)H(5)OH) were evaluated with a view to selective C(7)H(8) monitoring in indoor atmospheres. The fabricated YSZ-based sensor showed preferential responses toward 480 ppb C(2)H(5)OH, rather than the...