نتایج جستجو برای: ultimate tensile strength
تعداد نتایج: 248675 فیلتر نتایج به سال:
Mechanical properties and stress-strain curves of Cu, Ag and Au single crystals are calculated using ab initio methods. Elastic and Plastic regions are scrutinized. Yield stress and slope of these curves can shed light on brittlenesss and ductility of these metals that prove Cu, despite its high ultimate tensile strength, is less ductile than Au and Ag. Analysis of topology of charge density a...
Thermoplastic sugar beet pulp (thermo-mechanical processing was discussed in previous studies) was formed into film strips by extrusion. Film tensile properties are discussed according to the molecular structure of external plasticizer. Sorbitol, fructose and adipic acid have a marked antiplasticizing effect, while urea and xylitol gave higher ultimate tensile stress than glycerol for a compara...
BACKGROUND The aim of the present study was to evaluate the influence of water storage on micro tensile strength (µTS) and mass changes (MC) of two universal adhesives. MATERIAL AND METHODS 10 disk-shaped specimens were prepared for each adhesive; Scotchbond Universal (SCU) All-Bond Universal (ABU) and Adper Single Bond 2 (SB2). At the baseline and after 1 day and 28 days of water storage, th...
In this research similar joining of NiTi shape memory alloy was studied. For this purpose, NiTi alloy in the form of wires with circular cross section possessing martensitic phase structure at room temperature was used. By utilizing Nd:YAG pulsed laser welding method followed by optimizing its technical parameters, a defectless joint in terms of appearance and metallurgical properties was obtai...
The Spot welding is widely used for joining thin sheets in different industries; such as automotive industry. This method of welding is very easy to automate and maintain. In this study, the effect of nugget diameter on the tensile-shear strength of the spot welding joints was investigated. The specimens were manufactured from AISI 1008 HR sheets with 1.0 mm thickness. The eight different elect...
The mechanical properties of dentin are changed after bleaching, although the effects of the bleaching conditions on the tensile strength of dentin have not been determined. In the current study, a tensile test of bovine dentin was conducted after bleaching and the effects of the bleaching conditions were investigated, including the number of bleaching times, the location where the bleaching ag...
Effect of artificial ageing temperature on the mechanical properties of Al-6Si-0.5Mg alloy containing 0.5 – 4 wt% Cu was studied. The solution treated alloys containing different amounts of Cu were aged isochronally for 1 hour at temperatures up to 300C. The precipitation stages during ageing were monitored by hardness measurements. Tensile and impact properties were determined by standard test...
The microstructure, mechanical properties, and hydrogen permeation behavior of hot rolled enamel steel were investigated. Three coiling temperatures were adopted to gain different sizes of ferrite grain and TiC precipitates. The results show that a large number of interphase precipitates of nano-sized TiC can be obtained at coiling temperatures of 650 and 700 °C, while a few precipitates are fo...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید