In this paper, experimentally derived correlations of heat transfer and pressure drop are used in a Pareto based Multi-Objective Optimization (MOO) approach to find the best possible combinations of heat transfer and pressure drop of TiO2-water nanofluid flow in tubes fitted with multiple twisted tape inserts in different arrangement. In this study there are four independent design variables: t...

Experiments were performed to study the effects of introducing vapor into a dewar where a coaxial pulse tube refrigerator was used as a liquefier in the neck of the dewar. We were concerned about how the introduction of vapor might impact the refrigeration load as the vapor barrier in the neck of the dewar is disturbed. Three experiments were performed where the input power to the cooler was he...

This paper presents experimental investigation carried out on an unmodified four stroke diesel engine running with preheated straight vegetable oil (SVO) of Karanja. The viscosity of straight karanja oil was reduced by preheating the oil up to 1600C under different load condition. The preheating was done with the help of a Shell and Tube heat exchanger equipment without using any external power...

The classical substances as Hydrochlorofluorocarbons (HCFCs) used as working fluids in the vapour compression plants have to be replaced by new substances because of their ozone depletion potential and their greenhouse effect. Carbon dioxide (CO2) is non-toxic, non-flammable, has zero ozone depletion potential and negligible global warming potential as refrigerant. Referring to a transcritical ...

INTRODUCTION The Externally Fired Combined Cycle (EFCC) is an advanced coal-fired power generation concept with a potential for higher thermal efficiency and lower cost than conventional coal-based systems. 1 The concept incorporates efficient gas turbine combined cycle technology for use with coal. Unlike "direct fired" combined cycles, the EFCC does not require any special fuel preparation. T...

The capillary tube/suction line heat exchanger (SLHX) is widely used in small refrigeration systems. The refrigerant flowing in the SLHX experiences frictional and accelerational head losses, flashing, and heat transfer simultaneously. The simulation of refrigerant flow through SLHX is important since this will help engineers analyze and optimize the SLHX incorporated in a refrigeration system....

This study analyzes the characteristics of alumina (Al2O3)/water nanofluid to determine the feasibility of its application in an air-cooled heat exchanger for heat dissipation for PEMFC or electronic chip cooling. The experimental sample was Al2O3/water nanofluid produced by the direct synthesis method at three different concentrations (0.5, 1.0, and 1.5 wt.%). The experiments in this study mea...