Turbo-roundabouts are one of the most frequently recommended road junction design options when it comes to increasing traffic capacity and safety. This is in particular true suburban areas, with dominant flow on main moderate side road. Other intersections handling local considerably constricting availability space usually located vicinity such intersections. Another factor contributing limited...

A design point simulation and adaptation of anindustrial GE LM2500+ gas turbine engine is presented. The design point is chosen when the engine runs steadily at operating point and close to the nominal design condition at 29MW power output. The targeted performance parameters are the fuel flow rate (FF), the compressor exit total pressure (P3), the compressor turbine total exit temperature (T8)...

A miniature homogenous charge compression ignition (HCCI) free-piston engine compressor aimed at an ankle-foot orthosis application is described. Analysis of the human ankle shows that a fluid power source in the neighborhood of 10 W is needed. To account for compressor and actuator inefficiencies, the power output at the engine cylinder is designed to be 30 W. A compact engine compressor packa...

T he increase of the thrust-to-weight ratio of modern gas-turbine engines results in higher loads and a reduced number of blades and stages for the compressor. The designer must ensure the acceptable performance of each compressor stage (efficiency and stable operating range) and control the rising risk of blade boundary layer separation. This can be obtained using passive or active control dev...

An analytical study was carried out to investigate the performance of an oil supplying system of a variable speed compressor using a commercial CFD program. The simulations for the oil supplying system with the oil and air mixture were performed by varying compressor speed from 40 Hz to 90 Hz. Comparing the predicted with the measured data on the modified scroll compressor validated the simulat...

Supervision of the performance of an industrial gas turbine is important since it gives valuable information of the process health and makes efficient determination of compressor wash intervals possible. Slowly varying sensor faults can easily be misinterpreted as performance degradations and result in an unnecessary compressor wash. Here, a diagnostic algorithm is carefully combined with non-l...

A compressor is an automatic gain control effect that scales the output level of a signal based on the input level. If the input level is above a certain threshold, the compressor reduces the gain of the signal based on how high the input signal is above the threshold. The 1176LN is a hardware compressor originally produced in the late sixties. The circuitry has been tweaked several times to de...

From Wright Brothers 1903 to present day 2003, aeronautical technology has made a profound progress. This paper demonstrates the outcome of this progress in weight, wing area, and engine thrust in three categories of transport aircraft of short to long range, regional jets, and turbo-prop commuter aircraft. Also the paper includes those aircraft with distinct jump in aeronautical technology. Fe...

This study involves the development of a fmite element model of a hennetic reciprocating compressor for noise prediction applications. Inherent difficulties in developing the finite element model of a complicated structure are discussed and appropriate modeling strategies are evolved. The development of the complete compressor fmite element model is carried out in two stages modeling of the com...