In industrial production systems, including the most important factors in the economic field machining operations, reduce tool wear due to abrasive nature of the phenomenon on many factors, including temperature Lathe tool, influences, machining conditions (cutting speed, speed losses, forcing to rebuild parts of the manufacturing tolerances disassemble tool wear is caused by the phenomenon, as...

In recent years, Fluid Jet Polishing (FJP) has been studied for its potential as a finishing method on optical lenses, mirrors and molds for a number of materials, such a glass and nickel. In this paper, the surface integrity of binderless tungsten carbide after polishing by FJP was studied experimentally. Two aspects in particular were focused on: (1) identifying process conditions under which...

Tungsten carbides with surface areas ranging from 4 to 39 m2/g were prepared by the temperatureprogrammed carburization of tungsten oxide and nitride powders with pure C H 4 o r a 48.9% CH4 in H 2 mixture. Oxygen uptakes on the carbides were low most likely because of the presence of graphitic carbon at the surface. Nevertheless, the carbides were active and selective for the dehydrogenation of...

The present work has been carried out to study the sensitization behavior of AISI 304L austenitic stainless steel weld, fabricated using GTAW (gas tungsten arc welding process). This weld was subjected to post weld thermal aging (PWTA) treatments lying in the sensitization range, viz. 700 ?C for 30 minutes, 500 minutes and 1000 minutes for studying the influence of carbide precipitation on thei...

The Al-alloying treated tungsten carbide (WC)-Co tool was subjected to grinding using a jaw crusher and planetary mill followed by three wet chemical treatment steps to establish an effective recycling process for WC scraps, especially those generated as bulky and hard scrap. This alloyed WC tool was readily ground to a powder of 1 mm or less and divided into two portions that were 150 μm in si...