Frettingwear between a hemisphere and a flat plate is investigated experimentally and the effect of laser polishing is studied. The energy dissipated between the hemisphere and the flat plate is determined as eceived in revised form 23 April 2010 ccepted 28 April 2010 vailable online 13 May 2010 eywords: retting a function of operating conditions such as frequency and normal load and material p...

According to the direct homogenization theory of inhomogeneous material, a single medium homogenization constitutive model of the confined concrete in the steel box-concrete combined member has been established, and model parameters have been determined by the measured data of the bending test. By analyzing the theoretical ultimate strength and overall process curve, the results obtained is con...

This paper examines a few methods used in grounding analysis and illustrates the advantages, limitations, and the applicability of these methods. Computation results using these methods are presented and compared. The various cases modeled in this paper include grounding networks of different sizes, grounding networks with buried metallic structures such as steel pipes, and high frequency cases...

This study sums up the authors recent works on steel Non-Destructive Testing and Evaluation achieved between 2000 and 2008. The main related items are the establishment of a first-order correlation between the thermal diffusivity and the Vickers hardness HV as a guide to set an NDT protocol to investigate steel strengthened surface performance. A special attention is confined toward carburized ...

This paper presents an analysis of water modeling of steel pouring to study (1) air entrainment and (2) filter effectiveness to remove reoxidation inclusions. In the first part, a review is presented of the physical processes and parameters important in air entrainment in free-surface flows. Then, the use of a water system to model air entrainment in steel pouring is analyzed. Attention is focu...

This paper presents a series of tests on cold-formed stainless steel bolted connections. The test specimens were fabricated from three different types of stainless steel, including austenitic stainless steel EN1.4301 (AISI 304) and EN1.4571 (AISI 316Ti having small amount of titanium) as well as lean duplex stainless steel EN1.4162 (AISI S32101). The material properties of the three types of st...

Steel is the most widely used material in engineering for its cost/performance ratio and coatings are routinely applied on its surface to further improve its properties. Diamond coated steel parts are an option for many demanding industrial applications through prolonging the lifetime of steel parts, enhancement of tool performance as well as the reduction of wear rates. Direct deposition of di...

The theoretical model to compute the long-term stress of simply supported steel-concrete composite beam was deduced. The model includes the effects of steel bars in concrete slab, concrete shrinkage and creep. The computed results agreed well with the test results. On this basis, the effects of factors such as concrete age to loading, longitudinal reinforcement ratio in concrete slab, concrete ...

The strengthening and repair of existing structures using bonded carbon fiber reinforced polymer, CFRP, laminates has attracted a great deal of attention in the past two decades. Investigations clearly indicate the great potential of this method for restoring the capacity of corroded steel beams and improving their fatigue life. One important issue regarding the use of this technique in strengt...