the present work is an experimental study of steady state convective heat transfer of de-ionized water with a (0.04% by volume) volume fraction of al2o3 nanoparticles dispersed to form a nanofluid that flows through an aluminium tube.laminar fully developed flow heat transfer coefficient of al2o3 nanoparticles are dispersed in water in circular tube is discussed in this paper. in order to valid...

the presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. the aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coefficie...

The present article deals with the analysis of transient radiative transfer caused by a short-pulse laser irradiation on a participating medium. A general formulation of the governing transient radiative transfer equation applicable to a 3-D Cartesian enclosure has been presented. To solve the transient radiative transfer equation, formulations have been presented for the three commonly used me...

Using of nanofluids and ducts with corrugated walls are both supposed to enhance heat transfer, by increasing the heat transfer fluid conductivity and the heat transfer area respectively. Use of a diverging duct with a jet at inlet section may further increase heat transfer by creating recirculation zones inside the duct. In this work two-dimensional incompressible laminar flow of a nanofluid e...

the present experimental study reports on enhancement of heat transfer by addition of nanoparticles to the working fluid of commercial swimming pool heat exchangers under laminar flow condition. three different concentrations of titanium dioxide nanoparticles were added to the water as working fluid of a typical forced convective heat exchanger used to transfer heat to public swimming pools. th...

Fouling is a common, fundamental and costly problem in heat transfer systems, which reduces thermal efficiency of equipment, increases the energy loss and causes strong damage to the heat transfer equipment in various industries. The main causes of fouling on the heat transfer surfaces are salts with inverse temperature-solubility in the fluid which calcium sulfate is one of the most important ...