Plastic encapsulated microcircuits with aluminum triple track structures were exposed to mixed flowing gas conditions to simulate and accelerate possible environments during long-term storage. No increase in resistance was measured and no corrosion products were observed after 800 h of accelerated exposure. Further experimentation indicated that chloride gas reacts with surface moisture in micr...

FOREWORD Salt-induced reinforcing steel corrosion in concrete bridges has undoubtedly become a considerable economic burden to many State and local transportation agencies. Since the iron in the steel has a natural tendency to revert eventually to its most stable oxide state, this problem will, unfortunately, still be with us, but to a much lesser degree due to the use of various corrosion prot...

The product of corrosion in the feed water system transported into the boiler and gets deposited on the internal surface of waterwall tubes. Proper treatment of boiler feedwater effectively protects against corrosion of feedwater heaters, economizers, and deaerators. It leads to overheating and on-load corrosion and ultimately tube failure.. Heat is transferred through a thin layer of superheat...

About 75% of yellow phosphorus produced in the world is from China, and Yunnan province produces 60% of that in China. Yellow phosphorus is mostly produced by electric furnace from phosphate minerals. Through this method, 2500-3000 Nm/t tail gas is emitted, which causes pollution of the atmosphere. The key composition of the tail gas contains 80%~95%CO. Due to the “3R” principle (reducing, reus...

magnesium alloys as biodegradable materials can be used in body as an implant materials but since they have poor corrosion resistance, it is required to decrease their corrosion rate by biocompatible coatings. in this study, hydroxyapatite (ha) coatings in the presence of an intermediate layer of zrn as a biocompatible material, deposited on az91 magnesium alloy by ion beam sputtering method at...

the idea of smart corrosion inhibition is basis on either inhibitor consumption where it is needed or reducing harmful matrix interaction with it. in addition, applying corrosion inhibitor in a coating causes many problems such as loss of inhibition capability, coating degradation, or both. a useful technique to overcome this problem is applying of inert host systems of nanometer dimensions as ...

Among the various causes of free chlorine consumption in drinking water distribution networks, the internal corrosion of pipes has not been so far seriously considered. This work focused on the corrosion study of cast iron, as a representative material of those networks, in non-chlorinated and chlorinated waters, by both electrochemical impedance spectroscopy and classical photographic observat...

A method for measuring the real-time corrosion rates for Alloy 718, stainless steels (SS) 304L and 316L nuclear grade (NG), aluminum alloys 5052 (Al5052) and 6061 (Al6061), copper (Cu), tantalum (Ta), and tungsten (W) in two separate water systems that were irradiated by 800 MeV protons is presented. The ®rst water system was fabricated entirely of 304 SS, thoroughly cleaned before operation, a...

The corrosion behaviour of AZ31 magnesium alloy with different grain sizes immersed in simulated body fluids was compared in chloride solution (8 gl(-1)) and in phosphate-buffer solution (PBS). The influence of immersion time was also analyzed. Electrochemical techniques such as open circuit potential, polarization curves, transient currents and electrochemical impedance spectroscopy, complemen...