This research investigates a passive wireless antenna sensor designed for strain and crack sensing. When the antenna experiences deformation, antenna shape changes, causing shift in electromagnetic resonance frequency of the antenna. A radio frequency identification (RFID) chip is adopted for antenna signal modulation, so that a wireless reader can easily distinguish backscattered sensor signal...

Article history: Received 21 May 2017 Received in revised form 19 July 2017 Accepted 26 July 2017 Available online 7 August 2017 For the next generation display, foldable display is one of the attractive candidates. However, the degradation effects due to themechanical stress on the device are unavoidable. A strain due to themechanical stress generates cracks on the thin film transistors (TFTs)...

In this study, transparent conducting nanocrystalline ZnO:Ga (GZO) films were deposited by dc magnetron sputtering at room temperature on polymers (and glass for comparison). Electrical resistivities of 8.8 × 10-4 and 2.2 × 10-3 Ω cm were obtained for films deposited on glass and polymers, respectively. The crack onset strain (COS) and the cohesive strength of the coatings were investigated by ...

Maleic anhydride-modified polypropylene was compounded with commercially available surface-modified montmorillonite in a twin-screw extruder. Recompounding ensured the removal of visible tactoids from the extrudate but TEM and XRD techniques showed nonuniform dispersion of clay platelets. In this study, we investigated the mechanical and fracture properties of nanoclayfilled polypropylene. Emph...

This paper discusses the use of fracture mechanics for the microstructure tailoring of a fiber reinforced Engineered Cementitious Composite (ECC) to achieve extreme tensile ductility at the composite scale. It demonstrates that fracture mechanics applied to control fracture phenomena at the micro and meso material scales can lead to suppression of fracture failure at the macro structural scale....

The crack self-healing behavior of high-performance steel-fiber reinforced cement composites (HPSFRCs) was investigated. High-strength deformed steel fibers were employed in a high strength mortar with very fine silica sand to decreasing the crack width by generating higher interfacial bond strength. The width of micro-cracks, strongly affected by the type of fiber and sand, clearly produced th...

Macro-defect-free (MDF) cement with high flexure strength has been an active research area over several decades. To study the tensile properties of these materials, it is essential to understand the mode I crack propagation. In this article, cleavage cracking in calcium aluminate cement (CAC)–phenol resin composites is analyzed based on an energy method. The crack-trapping effect of the cement ...

This article proposes a new theory for predicting the crack bridging performance of random short fibers involved in cementitious composites. The current theoretical model for estimating crack bridging performance of Random Short Fiber Reinforced Cement Composites (RSFRCC) under tension is limited to specific constituent properties: friction dominant fiber-matrix interface and complete fiber pul...

Layered Ti-Al metal composite (LMC) fabricated by hot-pressing and hot-rolling process displays higher ductility than that of both components. In this paper, a combination of digital image correlation (DIC) and X-ray tomography revealed that strain delocalization and constrained crack distribution are the origin of extraordinary tensile ductility. Strain delocalization was derived from the tran...