نتایج جستجو برای: temperature rise
تعداد نتایج: 579155 فیلتر نتایج به سال:
In this paper, the thermal buckling analysis of a circular plate made of FGM materials with actuator/actuator piezoelectric layers based on neutral plane, classical plate theory and first order shear deformation plate theory is investigated. Reddy's model is assumed for material properties of FGM plate. Plate under the thermal loading, nonlinear temperature rise through the thickness and clampe...
At threshold irradiation (•—0.1 w./cm.) of the rabbit cornea with a carbon dioxide (COi) laser, there was no detectable rise in intraocular pressure and only a slight (1 to 2° C.) rise in aqueous temperature. On suprathreshold COt corneal irradiation, the intraocular pressure rose to a plateau, during irradiation and then gradually fell. There was a concomitant rise in temperature in the anteri...
This study investigated temperature rises caused by different light curing units (LCUs) in dentin of different thicknesses. The different LCUs tested in this study were namely: quartz-tungsten-halogen (QTH) (Heliolux DLX) LCU, plasma arc (PAC) (Apollo 95E Elite) LCU, and light emitting diode (LED) (Mini LED) in standard curing mode as well as pulse and soft-start modes. One hundred and forty de...
This research was carried out taking into consideration the defects of traditional process in and the most important factors affecting production of rock candy. Selected parameters used for effluent and rock candy consisted of supersaturation at 4 levels (1.3, 1.4, 1.5, and 1.6) and temperature at 3 levels (70, 80, 900C) with 3 replications. The physiochemical tests consisted of pH, color and i...
In this investigation, a numerical model expressing advection and diffusion effects is used to examine air temperature rise in urban areas that are on the leeward side of green areas. The model results are then verified by comparison with measurement results. When the measurement point is at a distance of 30 m or more from a green area, the air temperature of the urban area is not affected by t...
The goal of this article is to present electrochemical and economic models for a tubular solid oxide fuel cell stack. To carry out this research, first, a complete electrochemical model has been employed for a single cell of the fuel cell stack, and then its activation, ohmic and concentration losses have been obtained. The results show that with the increase of the working temperature and pres...
The wear of ultrahigh molecular weight polyethylene (UHMWPE) is considered as one of the major reasons for revision of artificial joints. While in vivo measurements have shown a significant temperature increase in knee implants, the amount of heat dissipated within the UHMWPE tibial component and its influence on the friction behavior when paired with a cobalt-chromium (CoCrMo) femoral componen...
BACKGROUND The heat produced by provisional restoration materials may injure the dental pulp. This study measured and compared peak temperatures during polymerization of 5 materials used in the fabrication of provisional restorations. METHODS The tested materials were 2 self-curing resins (Integrity and Protemp) and 3 dual-cure resins (Iso-Temp, TCB Dual Cure and Provipont DC). A mould the si...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید