Vacuum and temperature effects on moisture content, water vapor permeability (WVP), color (L, a, b, and DE), tensile strength (TS), elongation (E), and total soluble matter (TSM) of soy protein isolate (SPI) films were examined. SPI films were cured at 60, 72.5, or 85 °C and at 101.3, 81.32, or 61.32 kPa for 24 h. As a result of heat-curing moisture content, WVP, E, and TSM decreased, and total...

This paper presents the outcomes from an extensive investigation on the structure and geometry of single hemp fibres, as well as configurations and related tensile strength (TS) of hemp fibres, with the aid of field emission scanning and optical microscopy. The results showed that 1) the TS increased with the decrease of the diameter of individual test pieces, due possibly to the stacks of mult...

The mechanical properties of GH4169 alloy sheet after cold rolling (at 0%, 10%, 30%, 50% and 70%) and solid solution were investigated. The textures and Taylor factors were characterized using electron backscattering diffraction (EBSD). The fractions of δ phase were measured by X-ray diffraction. The contributions of δ phase, grain size, texture, and work hardening on the mechanical properties ...

This paper provides a new leadership alignment model incorporating various concepts focusing on leadership styles, organizational leadership, and situational strength. These concepts are brought together to introduce a leadership model, which looks not only at individual leadership and the effect of that on the organization but also at an organization as a system and how leadership behaviour an...

The high performance concrete is a highly complex material that consists of cement, water, blast furnace slag, super-plasticizer, coarse and fine aggregate. All of the materials play a certain role in the compressive strength of concrete. Combined with the information about age, the compressive strength of concrete is determined by eight attributes: 1. Cement (kg/m!) 2. Fly ash (kg/m!) 3. Blast...

Vacuum brazing products have excellent joining quality, less deformation and fewer residual stresses. The vacuum brazing technique has significant effect on the microstructure and property of the aluminum brazed joint, but there is little discussion about the optimization of the process. This study investigates how different process parameters affect the tensile properties of 6061-T6 aluminum v...

The present work study flexural and tensile behavior of short Kenaf fiber reinforced composites. The fibers are chemically treated in 2% NaOH solution at room temperature. Short fibers of 4mm and 8 mm are used in the present work. The composite lamina is prepared by hand molding using isopthalic polyester resin. Flexural test and tension tests are carried out as per ASTM standards. The flexural...

It is known since the early days of molecular biology that proteins locate their specific targets on DNA up to two orders of magnitude faster than the Smoluchowski 3D diffusion rate. It was the idea due to Delbrück that they are non-specifically adsorbed on DNA, and sliding along DNA provides for the faster 1D search. Surprisingly, the role of DNA conformation was never considered in this conte...

The purpose of this study was to evaluate the effect of addition of zinc sulfate to conventional and resinmodified glass ionomer restorative materials. The samples were prepared by addition of zinc sulfate to glass ionomer at different concentrations. The samples were tested for fluoride, zinc and aluminum release at different time intervals. The antibacterial activity of the restorative materi...

Nine restrained T-beams were tested in a study of the negative moment region shear strength of lightly reinforced concrete T-beams. Variables included the longitudinal reinforcement ratio p, (0.47 percent and 0. 70 percent) and the nominal stirrup strength (0 to 84 psi [0 to 0.60 MPa]). The test results are compared with the shear provisions of "Building Code Requirements for Reinforced Concret...