This study uses observations of mechanisms from previous work (the “undamaged cone”, toughness and extent of permanent out-of-plane deformation) to examine parametrically their effects on residual compression after impact (CAI) strength using finite element models. In previous experimental work, tougher material systems exhibited up to 30% greater CAI strength for a given damage area. Based on ...

To fully utilize the siliceous whiskers and improve the mechanical properties of oil-well cement, the cement composites with different additions of siliceous whiskers were prepared, and analyzed by means of scanning electron microscopy (SEM), mechanical testing, X-ray diffraction (XRD), and infrared spectrum analysis. The results showed that the addition of 2% siliceous whiskers could slightly ...

Mineralization is a typical strategy used in natural materials to achieve high stiffness and hardness for structural functions such as skeletal support, protection or predation. High mineral content generally leads to brittleness, yet natural materials such as bone, mollusk shells or glass sponge achieve relatively high toughness considering the weakness of their constituents through intricate ...

produce a composite, which is typically accomplished by incorporating continuous fibers, whiskers, platelets, or second The high-temperature mechanical properties of an in situ phase particles (3). For monolithic ceramics, in situ toughening toughened silicon carbide, with Al, B and C sintering additives can also be effective with microstructures consisting of elongated (ABC-Sic), have been exa...

The material properties of ten 2-O suture materials were evaluated tensiometrically at time = 0 and again after 6 weeks incubation in rats. All suture material was incubated and tested without knots. Specialized machinery was used with a custom securing apparatus to pull suture material apart at constant speed. Stress-strain curves were derived, and from these strength, toughness, strain at rup...

To improve the fretting damage (fretting wear and fretting fatigue) resistance of Ti-811 titanium alloy, three Cu/Ni multilayer films with the same modulation period thickness (200 nm) and different modulation ratios (3:1, 1:1, 1:3) were deposited on the surface of the alloy via ion-assisted magnetron sputtering deposition (IAD). The bonding strength, micro-hardness, and toughness of the films ...

Acrylic (polymethylmethacrylate or PMMA) bone cement was modified by the addition of high-strength zirconia fibers with average lengths of 200 microm and diameters of 15 microm or 30 microm. A novel emulsion polymerization process was developed to encapsulate individual fibers in PMMA. Improvements in tensile and compressive properties as well as in fracture toughness were investigated upon inc...

(2005) Fracture behavior of polyetherimide (PEI) and interlaminar fracture of CF/PEI laminates at elevated temperatures. Abstract To investigate effects of environmental temperature on fracture behaviour of a polyetherimide (PEI) thermoplastic polymer and its carbon fibre (CF/PEI) composite, experimental and numerical studies were performed on compact tension (CT) and double cantilever beam (DC...

an understanding of the strength of rice grains as affected by moisture content and temperature is important for analysis and prediction of cracking and/or breakage behavior during handling and processing. further, the magnitude of these properties at various moisture contents and temperatures is needed for the accurate design of milling machinery so that grain damage is minimized. to determine...