BACKGROUND: Lovastatin is known to inhibit its own synthesis in the fungus Aspergillus terreus. Therefore, the use of a fermentation strategy that continuously removes some of the lovastatin produced from the bioreactor can enhance its productivity. This paper reports on the effects of dilution rate and the composition of the feed medium on lovastatin production by A. terreus. RESULTS: The feed...

Chemical mechanical polishing (CMP) is a manufacturing process in which a wafer surface is polished by pressing it against a rotating pad that is flooded with slurry. The slurry itself is a fluid containing abrasive particles. Past experimentation has shown that the distribution of suspended particles in the slurry is significantly related to the distribution of material removal on the wafer du...

A laboratory scale aeration treatment system was built to study the fate of nitrogen during aeration of pig slurry. For each run evaluated, the nitrogen mass balance was determined including measurement of the nitrous oxide gas emissions. Intermittent aeration led to a nitrogen removal of about 53% of the total nitrogen content of the raw slurry. About 18% of the total nitrogen content of the r...

In the present study, the ice slurry refrigeration system with pre-cooling heat exchanger (ISSH) is studied experimentally to achieve the system performance, ice crystal formation time and the temperature of ice crystal formation. The operating parameters considered in this paper include the concentration of salt solution, suction pressure, discharge pressure and Energy Efficiency Ratio (EER). ...

To analyze the flow of an underfill encapsulant between the chip and substrate, a shear viscosity model is needed. This paper presents a model of the viscosity for the flow of slurry between two parallel walls, which is a typical situation found in electronic packaging applications. It is postulated that the flow behavior of a dense slurry is governed by the particle-particle and particle-wall ...

BACKGROUND Environmental issues, such as the fossil energy crisis, have resulted in increased public attention to use bioethanol as an alternative renewable energy. For ethanol production, water and nutrient consumption has become increasingly important factors being considered by the bioethanol industry as reducing the consumption of these resources would decrease the overall cost of ethanol p...

a crude biosurfactant mixture was produced in a 1.4 l tubular reactor by a mixed culture; afterthe thermal treatment of the whole culture an increase in emulsification activity and surface tension wasobserved, with a main effect on the first one. the emulsification index of the mixture obtained was of 60.4 %. the crude mixed biosurfactant was used to enhance hydrocarbon biodegradation of intemp...

In this study, the effect of slip casting parameters on the ultrafine microstructure and the density of pore-free YAG ceramic was evaluated. A stable, high concentrated aqueous YAG slurry using Dolapix-CE64 as a dispersant was prepared. The effect of dispersant concentration as well as the solid load on the stability and rheological behavior of the slurry was also studied. The optimal dispersan...

At present, very little information exists regarding what role the environmental slurry may play as an infection reservoir and/or route of transmission for bovine digital dermatitis (DD), a disease which is a global problem in dairy herds. To investigate whether DD-related bacteria belong to the indigenous microbiota of the dairy herd environment, we used deep amplicon sequencing of the 16S rRN...

Quantification of metal loading in supported catalysts is imperative; however, the analytical methods are usually time-consuming, expensive, and require sophisticated equipment and sample extraction with hazardous and corrosive strong acids. Herein, we report a new method for quantification of metal in supported catalysts using slurry sampling flame atomic absorption spectrometry. The slurry sa...