In this work it is proposed a novel antibacterial surface composed of an organicinorganic hybrid matrix of tetraethoxysilane (TEOS) and a weak polyelectrolyte like Poly(acrylic acid sodium salt) (PAA) which are deposited on glass slides by sol-gel method using the dip-coating technique [1]. This work is focused in the in situ synthesis of Ag nanoparticles (NPs) which are responsible of the anti...

Sol-gel processed SnO2 thin-film transistors (TFTs) were fabricated on SiO2/p+ Si substrates. The active channel layer was deposited by the sol-gel spin coating method. Precursor concentration influenced film thickness and surface roughness. As of precursor increased, films thicker smoother. device performance roughness layer. Decreased resulted in a with lower field-effect mobility, larger sub...

Osseointegration has been the concern of implantology for many years. Researchers have used various ceramic coatings for this purpose; however, piezoelectric ceramics (e.g., barium titanate [BTO]) are a novel field of interest. In this regard, BTO (BaTiO3) coating was fabricated by electrophoretic deposition on Ti6Al4V medical alloy, using sol-gel-synthesized nanometer BTO powder. Structure and...

The purpose of this work is to improve the cytocompatibility and corrosion resistance of magnesium alloy in the hope of preparing a biodegradable medical material. The aminated hydroxyethyl cellulose-induced biomimetic hydroxyapatite coating was successfully prepared on AZ31 magnesium alloy surface with a sol-gel spin coating method and biomimetic mineralization. Potentiodynamic polarization te...

A commercially available poly(vinyl butyral) (PVB) coating was modified using a combination of 1–10wt.% bis(trimethoxysilylethyl)benzene and dibutyltin dilaurate as the hydrolysis catalyst. Results of attenuated total reflectance (ATR)–FTIR analysis indicated the modification resulted in a hybrid coating material containing silicate moieties covalently bonded to the PVB polymer chains. Gravimet...

This work presents a structural investigation of lithium borate (LBO) thin film. Firstly, 100 nm SiO2 was grown on top of n–type Si substrate by dry oxidation. Secondly, LBO gel was prepared by sol–gel method. After it, thin film of LBO was deposited on functionally graded SiO2/Si stack by spin coating, and then Raman and infrared spectra were studied for different thickness of the LBO film. Go...

poly (lactide-co-glycolide)/bioactive glass/hydroxyapatite (pbgha) and poly (lactide-co-glycolide)/ bioactive glass (pbg) nanocomposite coatings with bone. materials and methods: sol-gel derived 58s bioactive glass nanoparticles, 50/50 wt% poly (lactic acid)/poly (glycolic acid) and hydroxyapatite nanoparticles were used to prepare the coatings. the nanocomposite coatings were characterized by ...

Cell behaviour such as adhesion, morphology, proliferation and functional activity are highly influenced by surface properties including hydrophobicity, roughness, texture and morphology. These surface properties may be controlled using a mixture of additive coating techniques to produce glass coatings by sol-gel process and soft lithography on dental ceramics. The purpose of this work was to c...

The objective of the work was to prepare and characterize titania sol-gel coatings on non-porous titanium and newly developed titanium alloys. Basic titania sol contained two forms of silver. Titania sol without silver was used as a reference sample. Coatings were prepared by dip-coating technique during stirring and fired. Coatings after firing were characterized by scanning electron microscop...

Sensors & Transducers Journal (ISSN 1726-5479) is a peer review international journal published monthly online by International Frequency Sensor Association (IFSA). Available in electronic and CD-ROM. Abstract: Stannic oxide thin films activated by palladium were prepared by sol-gel method. The morphology of the layers and the size of the particles were investigated by scanning electron microsc...